A study of the hardness and wear rate of elastomer composites reinforced by AL2O3 and SIO2 particles
العناوين الأخرى
SiO و 2 Al2O دراسة الصلادة و معدل البلى لمتراكب مطاطي مقوى بدقائق من 3
المؤلفون المشاركون
Abid, Mayyadah Sh.
Ulaywi, Majid Ahmad
Hamzah, Muhammad Sallab
المصدر
Engineering and Technology Journal
العدد
المجلد 27، العدد 07 (30 مايو/أيار 2009)، ص ص. 1422-1434، 13ص.
الناشر
تاريخ النشر
2009-05-30
دولة النشر
العراق
عدد الصفحات
13
التخصصات الرئيسية
الموضوعات
الملخص AR
تناول هذا البحث دراسة تأثير إضافة دقائق السليكا و الألومينا بصورة منفصلة و بنسب مختلفة5, 10, 15, 20 and 25 pphr) ) على الصلادة و معدل البلى للمطاط الطبيعي و مطاط الستايرين-بيوتادايين.
بينت النتائج بان الصلادة تزداد مع زيادة نسب إضافة مادة التقوية, بينما معدل البلى يقل مع زيادة نسب إضافة مادة التقوية.
حيث أن أعلى قيم للصلادة و اقل معدل بلى تم الحصول عليه هما للمطاط الستايرين-بيوتادايين المقوى بدقائق السليكا بنسبة (25 pphr) مقارنة بالمطاط الطبيعي.
و كذلك عند التقوية بدقائق السليكا يقل معدل البلى أكثر مما عليه عند التقوية بدقائق الألومينا.
حيث بلغت قيم الصلادة و معدل البلى للمطاط NR و المطاط SBR المقوى بدقائق السليكا و الألومينا بنسبة (25 pphr) موضحة بالجدول التالي : (Shore A) الصلادة (mm3 / mm) معدل البلى المتراكب 78 2.965 SBR + 25 pphr Al2O3 85 0 91 SBR + 25 pphr SiO2 68 4.3 NR + 25 pphr Al2O3 76 2 NR + 25 pphr SiO2
الملخص EN
This research deals with the study the effect of adding the silica particles and alumina particles separately with different ratio (5, 10, 15, 20, and 25 pphr) on the hardness and wear rate of natural rubber NR and styrene butadiene rubber SBR.
The results show that the hardness increases with the increase the loading level of reinforcing particles, while the wear rate decreases with the increase the loading level of the reinforcing particles.
The largest value of the hardness and the lowest value of the wear rate were for styrene butadiene reinforced with 25 pphr of silica as compared with natural rubber.
Also the reinforcing by SiO2 increases the hardness and decreases the wear rate more than of Al2O3.
The results indicated that the hardness and the wear rate for SBR and NR reinforced by SiO2 and Al2O3 at (25 pphr) illustrated in the following table : Composite Wear Rate (mm3 / mm) Hardness (Shore A) SBR+25 pphr Al2O3 2.965 78 SBR+25 pphr SiO2 0.91 85 NR+25 pphr Al2O3 4.3 68 NR+25 pphr SiO2 2 76
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ulaywi, Majid Ahmad& Hamzah, Muhammad Sallab& Abid, Mayyadah Sh.. 2009. A study of the hardness and wear rate of elastomer composites reinforced by AL2O3 and SIO2 particles. Engineering and Technology Journal،Vol. 27, no. 07, pp.1422-1434.
https://search.emarefa.net/detail/BIM-49183
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ulaywi, Majid Ahmad…[et al.]. A study of the hardness and wear rate of elastomer composites reinforced by AL2O3 and SIO2 particles. Engineering and Technology Journal Vol. 27, no. 07 (2009), pp.1422-1434.
https://search.emarefa.net/detail/BIM-49183
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ulaywi, Majid Ahmad& Hamzah, Muhammad Sallab& Abid, Mayyadah Sh.. A study of the hardness and wear rate of elastomer composites reinforced by AL2O3 and SIO2 particles. Engineering and Technology Journal. 2009. Vol. 27, no. 07, pp.1422-1434.
https://search.emarefa.net/detail/BIM-49183
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p.1426-1427
رقم السجل
BIM-49183
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر