Optimized Injection Molding of Unfilled and Glass Filled PA6 Gears
المؤلفون المشاركون
Kamaruddin, Shahrul
Othman, Abdul Rahim
Mehat, Nik Mizamzul
المصدر
International Journal of Manufacturing Engineering
العدد
المجلد 2014، العدد 2014 (31 ديسمبر/كانون الأول 2014)، ص ص. 1-8، 8ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2014-02-10
دولة النشر
مصر
عدد الصفحات
8
التخصصات الرئيسية
العلوم الهندسية و تكنولوجيا المعلومات
الملخص EN
Shrinkage behavior is a crucial problem in manufacturing plastic molded gear.
This is because it negatively affects the dimensional stability and accuracy of the involute profile, as well as the concentricity, roundness, tooth spacing uniformity, and size of the gear.
By integrating the Taguchi robust design, Grey relational analysis, and principal component analysis, we investigated the dimensional stability related to the shrinkage of tooth thickness, addendum circle, and dedendum circle of molded gear via the optimization of processing parameters and glass fiber reinforcement.
The results revealed that the optimal combination of the processing parameters of the molded gear to achieve minimum shrinkage is melt temperature of 260°C, packing pressure of 60%, packing time of 5 s, and cooling time of 30 s.
The melt temperature showed the highest comparability sequence among the four key process parameters examined, followed by packing pressure, cooling time, and packing time.
Meanwhile, the presence of glass fibers induced higher deviations of tooth thickness, addendum circle, and dedendum circle than those of the unfilled polyamide 6 gears.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Mehat, Nik Mizamzul& Kamaruddin, Shahrul& Othman, Abdul Rahim. 2014. Optimized Injection Molding of Unfilled and Glass Filled PA6 Gears. International Journal of Manufacturing Engineering،Vol. 2014, no. 2014, pp.1-8.
https://search.emarefa.net/detail/BIM-493171
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Mehat, Nik Mizamzul…[et al.]. Optimized Injection Molding of Unfilled and Glass Filled PA6 Gears. International Journal of Manufacturing Engineering No. 2014 (2014), pp.1-8.
https://search.emarefa.net/detail/BIM-493171
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Mehat, Nik Mizamzul& Kamaruddin, Shahrul& Othman, Abdul Rahim. Optimized Injection Molding of Unfilled and Glass Filled PA6 Gears. International Journal of Manufacturing Engineering. 2014. Vol. 2014, no. 2014, pp.1-8.
https://search.emarefa.net/detail/BIM-493171
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-493171
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر