![](/images/graphics-bg.png)
Performance of PVD-Coated Carbide Tools When Turning Inconel 718 in Dry Machining
المؤلفون المشاركون
Akhyar Ibrahim, Gusri
Said, Ahmad Yasir Moh.
Abu Yazid, Moh. Zaid
Che Haron, Che Hassan
Abdul Ghani, Jaharah
المصدر
Advances in Mechanical Engineering
العدد
المجلد 2011، العدد 2011 (31 ديسمبر/كانون الأول 2011)، ص ص. 1-7، 7ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2011-11-10
دولة النشر
مصر
عدد الصفحات
7
التخصصات الرئيسية
الملخص EN
Inconel 718 has found its niche in many industries, owing to its unique properties such as high oxidation resistance and corrosion resistance even at very high temperatures.
Coated carbide tool with hard layer of PVD TiAlN is used to turn Inconel 718.
Taguchi method with the orthogonal array L9 is applied in this experiment with the parameter cutting speed of 60–80 m/min, feed rate of 0.2–0.3 mm/rev, and depth of cut of 0.3–0.5 mm.
The results show that depth of cut is a significant influence to the tool life.
Cutting speed of 60 m/min, feed rate of 0.2 mm/rev, and depth of cut of 0.3 mm are the optimum parameters.
The flank wear, crater wear, notch wear, and nose wear are the wear mechanisms on the carbide tool.
Through the SEM, abrasion, attrition, and adhesion are the wear mechanisms which can be seen on the cutting tool.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Akhyar Ibrahim, Gusri& Che Haron, Che Hassan& Abdul Ghani, Jaharah& Said, Ahmad Yasir Moh.& Abu Yazid, Moh. Zaid. 2011. Performance of PVD-Coated Carbide Tools When Turning Inconel 718 in Dry Machining. Advances in Mechanical Engineering،Vol. 2011, no. 2011, pp.1-7.
https://search.emarefa.net/detail/BIM-498354
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Akhyar Ibrahim, Gusri…[et al.]. Performance of PVD-Coated Carbide Tools When Turning Inconel 718 in Dry Machining. Advances in Mechanical Engineering No. 2011 (2011), pp.1-7.
https://search.emarefa.net/detail/BIM-498354
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Akhyar Ibrahim, Gusri& Che Haron, Che Hassan& Abdul Ghani, Jaharah& Said, Ahmad Yasir Moh.& Abu Yazid, Moh. Zaid. Performance of PVD-Coated Carbide Tools When Turning Inconel 718 in Dry Machining. Advances in Mechanical Engineering. 2011. Vol. 2011, no. 2011, pp.1-7.
https://search.emarefa.net/detail/BIM-498354
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-498354
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)