The Use of Response Surface Methodology to Optimize Parameter Adjustments in CNC Machine Tools
المؤلفون المشاركون
Chen, Shao-Hsien
Chen, Yen-Sheng
Jehng, Wern-Dare
المصدر
Mathematical Problems in Engineering
العدد
المجلد 2014، العدد 2014 (31 ديسمبر/كانون الأول 2014)، ص ص. 1-11، 11ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2014-06-10
دولة النشر
مصر
عدد الصفحات
11
التخصصات الرئيسية
الملخص EN
This paper mainly covers a research intended to improve the circular accuracy of CNC machine tools and the adjustment and analysis of the main controller parameters applied to improve accuracy.
In this study, controller analysis software was used to detect the adjustment status of the servo parameters of the feed axis.
According to the FANUC parameter manual, the parameter address, frequency, response measurements, and the one-fourth corner acceleration and deceleration measurements of the machine tools were adjusted.
The experimental design (DOE) was adopted in this study for taking circular measurements and engaging in the planning and selection of important parameter data.
The Minitab R15 software was adopted to predict the experimental data analysis, while the seminormal probability map, Plato, and analysis of variance (ANOVA) were adopted to determine the impacts of the significant parameter factors and the interactions among them.
Additionally, based on the response surface map and contour plot, the optimal values were obtained.
In addition, comparison and verification were conducted through the Taguchi method, regression analysis to improved machining accuracy and efficiency.
The unadjusted error was 7.8 μm; through the regression analysis method, the error was 5.8 μm and through the Taguchi analysis method, the error was 6.4 μm.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Chen, Shao-Hsien& Jehng, Wern-Dare& Chen, Yen-Sheng. 2014. The Use of Response Surface Methodology to Optimize Parameter Adjustments in CNC Machine Tools. Mathematical Problems in Engineering،Vol. 2014, no. 2014, pp.1-11.
https://search.emarefa.net/detail/BIM-498906
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Chen, Shao-Hsien…[et al.]. The Use of Response Surface Methodology to Optimize Parameter Adjustments in CNC Machine Tools. Mathematical Problems in Engineering No. 2014 (2014), pp.1-11.
https://search.emarefa.net/detail/BIM-498906
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Chen, Shao-Hsien& Jehng, Wern-Dare& Chen, Yen-Sheng. The Use of Response Surface Methodology to Optimize Parameter Adjustments in CNC Machine Tools. Mathematical Problems in Engineering. 2014. Vol. 2014, no. 2014, pp.1-11.
https://search.emarefa.net/detail/BIM-498906
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-498906
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر