The Processing Design of Jute Spun YarnPLA Braided Composite by Pultrusion Molding
المؤلفون المشاركون
المصدر
Advances in Mechanical Engineering
العدد
المجلد 2013، العدد 2013 (31 ديسمبر/كانون الأول 2013)، ص ص. 1-8، 8ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2013-03-06
دولة النشر
مصر
عدد الصفحات
8
التخصصات الرئيسية
الملخص EN
Prevalently, the light has been shed on the green composite from the viewpoint of environmental protection.
Jute fibers are natural fibers superior due to light weight, low cost, and being environmentally friendly corresponding to the green composite materials.
Meticulously, fibers of polylactic acid (PLA) thermoplastic biopolymer were used as the resin fibers.
In this study, the fabrication of tubular jute spun yarn/PLA braided composite by pultrusion molding was presented.
The intermediate materials were prepared by commingled technique.
The braiding technique manufactured preform which had jute fiber diagonally oriented at certain angles with the glass fiber inserted into the braiding yarns along the longitudinal direction.
The braided preforms were pulled through a heated die where the consolidation flow took place due to reduced matrix viscosity and pressure.
The pultrusion experiments were done with jute/PLA commingled yarns and combined with glass fiber yarns to fabricate the tubular composite.
Impregnation quality was evaluated by microscope observation of the pultruded cross-sections.
The flexural mechanical properties of the pultruded were measured by four-point bending test.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Memon, Anin& Nakai, Asami. 2013. The Processing Design of Jute Spun YarnPLA Braided Composite by Pultrusion Molding. Advances in Mechanical Engineering،Vol. 2013, no. 2013, pp.1-8.
https://search.emarefa.net/detail/BIM-500409
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Memon, Anin& Nakai, Asami. The Processing Design of Jute Spun YarnPLA Braided Composite by Pultrusion Molding. Advances in Mechanical Engineering No. 2013 (2013), pp.1-8.
https://search.emarefa.net/detail/BIM-500409
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Memon, Anin& Nakai, Asami. The Processing Design of Jute Spun YarnPLA Braided Composite by Pultrusion Molding. Advances in Mechanical Engineering. 2013. Vol. 2013, no. 2013, pp.1-8.
https://search.emarefa.net/detail/BIM-500409
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-500409
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر