Effects of Process Parameters on Microstructure of A2017 Alloy Strip Produced by a Novel Semisolid Rolling
المؤلفون المشاركون
Xu, Guang-ming
Guan, Ren-guo
Wang, Xiang
Zhao, Zhan-yong
Liu, Chun-ming
Zhang, Jian
المصدر
Advances in Mechanical Engineering
العدد
المجلد 2013، العدد 2013 (31 ديسمبر/كانون الأول 2013)، ص ص. 1-7، 7ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2013-11-02
دولة النشر
مصر
عدد الصفحات
7
التخصصات الرئيسية
الملخص EN
In order to produce A2017 alloy strip, a novel semisolid rolling process was studied.
The effects of process parameters on microstructure were investigated.
The experimental results show that the grain size and roundness of A2017 alloy strip increase with the increment of casting temperature.
The grain size of strip decreases firstly and then increases with the increment of vibration frequency.
When the sloping plate length was between 500 mm and 600 mm, the casting temperature was between 650∘C and 680∘C, the roll speed was 0.087 m·s−1, and the vibration frequency was 50 Hz, A2017 alloy strip with a cross-sectional size of 4×160 mm was produced.
The microstructure of strip is mainly composed of fine spherical or rosette grains with a certain elongation along rolling direction, and the average grain size is 36.4 μm.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Zhao, Zhan-yong& Guan, Ren-guo& Wang, Xiang& Zhang, Jian& Liu, Chun-ming& Xu, Guang-ming. 2013. Effects of Process Parameters on Microstructure of A2017 Alloy Strip Produced by a Novel Semisolid Rolling. Advances in Mechanical Engineering،Vol. 2013, no. 2013, pp.1-7.
https://search.emarefa.net/detail/BIM-501155
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Zhao, Zhan-yong…[et al.]. Effects of Process Parameters on Microstructure of A2017 Alloy Strip Produced by a Novel Semisolid Rolling. Advances in Mechanical Engineering No. 2013 (2013), pp.1-7.
https://search.emarefa.net/detail/BIM-501155
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Zhao, Zhan-yong& Guan, Ren-guo& Wang, Xiang& Zhang, Jian& Liu, Chun-ming& Xu, Guang-ming. Effects of Process Parameters on Microstructure of A2017 Alloy Strip Produced by a Novel Semisolid Rolling. Advances in Mechanical Engineering. 2013. Vol. 2013, no. 2013, pp.1-7.
https://search.emarefa.net/detail/BIM-501155
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-501155
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر