Remote Synchronization Experiments for Quasi-Zenith Satellite System Using Multiple Navigation Signals as Feedback Control

الملخص EN

The remote synchronization system for the onboard crystal oscillator (RESSOX) is a remote control method that permits synchronization between a ground station atomic clock and Japanese quasi-zenith satellite system (QZSS) crystal oscillators.

To realize the RESSOX of the QZSS, the utilization of navigation signals of QZSS for feedback control is an important issue.

Since QZSS transmits seven navigation signals (L1C/A, L1CP, L1CD, L2CM, L2CL, L5Q, and L5I), all combinations of these signals should be evaluated.

First, the RESSOX algorithm will be introduced.

Next, experimental performance will be demonstrated.

If only a single signal is available, ionospheric delay should be input from external measurements.

If multiple frequency signals are available, any combination, except for L2 and L5, gives good performance with synchronization error being within two nanoseconds that of RESSOX.

The combination of L1CD and L5Q gives the best synchronization performance (synchronization error within 1.14 ns).

Finally, in the discussion, comparisons of long-duration performance, computer simulation, and sampling number used in feedback control are considered.

Although experimental results do not correspond to the simulation results, the tendencies are similar.

For the overlapping Allan deviation of long duration, the stability of 1.23×10−14 at 100,160 s is obtained.