Study the effect of the (al)‎ and (al2o3)‎ particles reinforcing on the wear volume loss characteristics of epoxy

الملخص EN

This study investigated experimentally the wear volume loss of the epoxy reinforced by (Al) and (Al2O3) particles of grain size (≤ 30 µm) with different four volume fractions of the reinforcements which are (3 %, 6 %, 9 %, and 12 % Vol.).

Pin-on-Disc wear test were conducted to exam the wear volume loss behavior of the composite specimens.

The wear test results indicated that the wear volume loss of the specimen increases with the increase of the applied load and sliding time, while it decreases with the increase of the volume fraction of the reinforcing material.

Also the results show that the average volume loss of the epoxy reinforced by (Al) was higher than reinforced by Al2O3) by the value was (45 % ) at volume fraction (= 6 %), sliding speed (Vs =2) m/sec.) and sliding time (T =300 sec.).