Effect of some processing parameters on arc sprayed coating
العناوين الأخرى
تأثير بعض العوامل التشغيلية على طلاء الرش بالقوس
المؤلف
المصدر
Engineering and Technology Journal
العدد
المجلد 26، العدد 12 (31 ديسمبر/كانون الأول 2008)، ص ص. 1550-1562، 13ص.
الناشر
تاريخ النشر
2008-12-31
دولة النشر
العراق
عدد الصفحات
13
التخصصات الرئيسية
الملخص AR
في هذا البحث تم استخدام أكساء من مادة الفولاذ الكرومي (13 % كروم) في تصليح مساند من نوع حديد الصب العقدي.
ناقش هذا البحث دراسة العوامل التشغيلية المؤثرة على صلادة و خشونة و مقاومة بليان الاكساء المنفذ بطريقة الرش بالقوس الكهربائي, و تشمل هذه العوامل الفولتيه المسلطة و معدل تغذية السلك و مسافة الرش و سمك طبقة الاكساء.
و أن جميع العينات المكسية قد تم فحص مقاومتها للبليان باستخدام فحص المسمار على القرص.
أوضحت النتائج النهائية للبحث بان أحسن فولتية يمكن استخدامها لهذا التطبيق هي (28-30) فولت إذ انخفض معدل السوفان بمقدار 8 % للسطوح التي تم اكساؤها.
كما ظهر انخفاض بمعدل السوفان بنسبة 46 % بزيادة معدل تغذية أسلاك الطلاء من 68 إلى 122 ملم / ثا.
كما وجد أن أفضل مسافة للرش تكون بحدود (10-15) سم للحصول على سطوح أكساء جيدة مع تحسين في زيادة مقاومة السوفان بنسبة تقارب 58 %.
كذلك اثبت البحث أن لزيادة السمك الاكساء تأثير ايجابي في خفض معدل السوفان بنسبة 43 %.
الملخص EN
In this work, arc spray coating of 13% Cr-steel (BS403S17) has been used in repair of nodular cast iron journals.
This study discusses the processing factors effecting the roughness, hardness, and wear resistance of coating produced by arc spraying.
The studied factors are applied voltage, wire feed rate, spraying distance (distance between gun nozzle and substrate) and coating thickness.
All coated samples were tested using pin on ring wear testing machine.
The final results showed that the best voltage in this application is between 28 and 30 V.
With this voltage a reduction in wear rate of about 8% can be obtained.
The research reveals that the wear rate decreases by 46% with increasing in wire feed rate from 68 to 122 mm / s and it is found that the best spraying distance is about 10 to 15 cm to get a good coating surfaces with reduction by about 58% in wear rate.
It is also approved that coating thickness has positive effect on reducing wear rate by 43%.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ataiwi, Ali Husayn. 2008. Effect of some processing parameters on arc sprayed coating. Engineering and Technology Journal،Vol. 26, no. 12, pp.1550-1562.
https://search.emarefa.net/detail/BIM-50764
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ataiwi, Ali Husayn. Effect of some processing parameters on arc sprayed coating. Engineering and Technology Journal Vol. 26, no. 12 (2008), pp.1550-1562.
https://search.emarefa.net/detail/BIM-50764
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ataiwi, Ali Husayn. Effect of some processing parameters on arc sprayed coating. Engineering and Technology Journal. 2008. Vol. 26, no. 12, pp.1550-1562.
https://search.emarefa.net/detail/BIM-50764
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 1556
رقم السجل
BIM-50764
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر