Study of thermal characteristics of a composite specimen experimentally and by using finite element method

المؤلفون المشاركون

Uleiwi, Jawad Kazim
Salim, Sura

المصدر

Engineering and Technology Journal

العدد

المجلد 26، العدد 04 (30 إبريل/نيسان 2008)، ص ص. 429-441، 13ص.

الناشر

الجامعة التكنولوجية

تاريخ النشر

2008-04-30

دولة النشر

العراق

عدد الصفحات

13

التخصصات الرئيسية

علوم الأرض و المياه و البيئة
الكيمياء

الموضوعات

الملخص AR

تناول هذا البحث دراسة تأثير كل من الكسر الحجمي للألياف و اتجـاه الأليـاف علـى الموصلية الحرارية و درجات حرارة سطح الجدار لعينة مادة مركبة علـى شـكل قـرص لـي. بينت النتائج بأنه بزيادة الكسر الحجمي تزداد الموصـلية الحراريـة للمـادة المركبـة و بالاتجاه الطولي للألياف و تكون اكبر من الموصلية الحرارية بالاتجاه العمودي على الأليـاف.

كما بينت النتائج العملية بأن أعلى موصلية حرارية للعينة المركبة كانت (0.611 W/m.

˚c) عند كسر حجمي (Vf = 40%) و باتجاه موزاي للألياف بينما أقل قيمـة للموصـلية الحراريـة للعينة المركبة كانت (0.195 /m.

˚c) عند كسر حجمي (Vf = 10%) و باتجاه عمودي على الألياف.

و أظهرت النتائج أيضا بان أعلى فرق للموصلية الحرارية بين النتائج العملية و النتـائج النظرية هو (7%) عند كسر حجمي (10%) و بالاتجاه العمودي على الألياف.

بينمـا أقـل فرق للموصلية الحرارية بين النتائج العملية و النتائج النظرية هو (%3.5) عند كسر حجمـي (40%) و بالاتجاه الطولي للألياف.

الملخص EN

This research deals with the study of the effect of fibers volume fraction and fibers orientation on the thermal conductivity and wall surface temperatures for composite specimen in form of Lee’s disk by using experimental work and finite element technique.

The results show that the thermal conductivity increases with increasing fiber volume fraction of the composite specimen, and in the longitudinal direction is larger than in the lateral fiber direction.

The experimental results indicated that the largest value of the thermal conductivity for the composite specimen was (0.611 W / m.

°c) at (Vf = 40 %) in the longitudinal direction, while the lowest value was (0.195 W / m.

°c) at (Vf = 10 %) in the lateral direction.

Also the results show that the maximum difference for the thermal conductivity between the experimental work and finite element method was (7 %) at (Vf = 10 %) in the lateral direction while the minimum value was (3.5 %) at (Vf = 40 %) in the longitudinal direction.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

Uleiwi, Jawad Kazim& Salim, Sura. 2008. Study of thermal characteristics of a composite specimen experimentally and by using finite element method. Engineering and Technology Journal،Vol. 26, no. 04, pp.429-441.
https://search.emarefa.net/detail/BIM-51860

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

Uleiwi, Jawad Kazim& Salim, Sura. Study of thermal characteristics of a composite specimen experimentally and by using finite element method. Engineering and Technology Journal Vol. 26, no. 04 (2008), pp.429-441.
https://search.emarefa.net/detail/BIM-51860

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

Uleiwi, Jawad Kazim& Salim, Sura. Study of thermal characteristics of a composite specimen experimentally and by using finite element method. Engineering and Technology Journal. 2008. Vol. 26, no. 04, pp.429-441.
https://search.emarefa.net/detail/BIM-51860

نوع البيانات

مقالات

لغة النص

الإنجليزية

الملاحظات

Includes bibliographical references : p. 444

رقم السجل

BIM-51860