Taguchi design optimization of machining parameters on the CNC end milling process of halloysite nanotube with aluminium reinforced epoxy matrix (HNT AL EP) hybrid composite
المؤلفون المشاركون
Sapuan, S. M.
Ali, Muadh H.
Ansari, M. N. M.
Pang, J. S.
Zarruq, Umar S.
المصدر
Housing and Building National Research Center Journal
العدد
المجلد 10، العدد 2 (31 أغسطس/آب 2014)، ص ص. 138-144، 7ص.
الناشر
المركز القومي لبحوث الإسكان و البناء
تاريخ النشر
2014-08-31
دولة النشر
مصر
عدد الصفحات
7
التخصصات الرئيسية
الملخص EN
This paper introduces the application of Taguchi optimization methodology in optimizing the cutting parameters of end-milling process formachining the halloysite nanotubes (HNTs) with aluminium reinforced epoxy hybrid composite material under dry condition.
The machining parameters which are chosen to be evaluated in this study are the depth of cut (d), cutting speed (S) and feed rate (f).While, the response factors to be measured are the surface roughness of themachined composite surface and the cutting force.Anorthogonal array of theTaguchimethodwas set-upand used to analyse the effect of the milling parameters on the surface roughness and cutting force.
The result from this study shows that the application of the Taguchi method can determine the best combination of machining parameters that can provide the optimal machining response conditions which are the lowest surface roughness and lowest cutting force value.
For the best surface finish, A1–B3–C3 (d = 0.4 mm, S =1500 rpm, f = 60 mmpm) is found to be the optimized combination of levels for all the three control factors from the analysis.Meanwhile, the optimized combination of levels for all the three control factors from the analysis which provides the lowest cutting force was found to be A2–B2–C2 (d = 0.6 mm, S =1000 rpm, f = 40mmpm).
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Pang, J. S.& Ansari, M. N. M.& Zarruq, Umar S.& Ali, Muadh H.& Sapuan, S. M.. 2014. Taguchi design optimization of machining parameters on the CNC end milling process of halloysite nanotube with aluminium reinforced epoxy matrix (HNT AL EP) hybrid composite. Housing and Building National Research Center Journal،Vol. 10, no. 2, pp.138-144.
https://search.emarefa.net/detail/BIM-519121
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Pang, J. S.…[et al.]. Taguchi design optimization of machining parameters on the CNC end milling process of halloysite nanotube with aluminium reinforced epoxy matrix (HNT AL EP) hybrid composite. Housing and Building National Research Center Journal Vol. 10, no. 2 (Aug. 2014), pp.138-144.
https://search.emarefa.net/detail/BIM-519121
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Pang, J. S.& Ansari, M. N. M.& Zarruq, Umar S.& Ali, Muadh H.& Sapuan, S. M.. Taguchi design optimization of machining parameters on the CNC end milling process of halloysite nanotube with aluminium reinforced epoxy matrix (HNT AL EP) hybrid composite. Housing and Building National Research Center Journal. 2014. Vol. 10, no. 2, pp.138-144.
https://search.emarefa.net/detail/BIM-519121
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 144
رقم السجل
BIM-519121
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر