Investigation of wear behavior of 1060 and 1095 steels using regression analysis
العناوين الأخرى
فحص سلوك البلى للفولاذ 1060 و 1095 باستخدام تحليل الانحدار
المؤلف
المصدر
Engineering and Technology Journal
العدد
المجلد 33، العدد 3A (31 مارس/آذار 2015)، ص ص. 753-761، 9ص.
الناشر
تاريخ النشر
2015-03-31
دولة النشر
العراق
عدد الصفحات
9
التخصصات الرئيسية
الموضوعات
الملخص AR
تم دراسة تصرفات البلى الالتصاقي الجاف لسبائك من الصلب الكربوني ذات محتوى كربون 0.60 % و 0.95 % باستخدام جهاز اختبار البلى المسمار على الدولاب و عند درجة حرارة الغرفة و الانزلاق الجاف تحت ظروف بلى مختلفة.
العينات المحضرة استخدمت بحالة المعادلة للتأكد بأن جميع العينات بنفس الظروف.
الهدف من البحث هو دراسة تأثير ظروف التشغيل مثل السرعة الدورانية و الحمل المسلط و زمن الانزلاق و تأثيرها المتداخل على سلوك البلى باستخدام تحليل الانحدار >.
النتائج التي تم استخدامها للحصول على معادلات رياضية لوصف معدل البلى للصلب.
تم وصف معدل البلى من خلال التأثير المتداخل للسرعة الدورانية و الحمل العمودي و زمن الانزلاق و تأثيرها المتداخل.
من خلال تطبيق المتغيرات مثل تأثير السرعة الدورانية و الحمل العمودي و زمن الانزلاق تم ملاحظة تأثيرات معينة على تصرفات البلى لكلا النوعين من الصلب الكربوني.
إن أهم متغير للصلب 1060 هو زمن الانزلاق يليه الحمل العمودي و من ثم السرعة الدورانية.
أما الصلب 1095 فأن السرعة الدورانية هي العامل الرئيسي المؤثر ثم الحمل العمودي و زمن الانزلاق.
تم الاستنتاج من النتاج بن سلوك البلى لهذه الأنواع من الصلب و تأثيرها ظروف التشغيل على البلى تعتمد على الخصائص الفيزيائية و الميكانيكية لهذه الأنواع من الفولاذ.
الملخص EN
The dry adhesive wear behavior of 1 060 and 1095 steels using pin on wheel wear test rig at room temperature under different wear conditions has been studied.
The prepared specimens are normalized to make sure that all specimens are in the same conditions.
'The objective of this research is to study the effect of operating parameters such as rotating speed , normal load and sliding time and their interaction on the wear behavior using regression analysis.
Detailed data obtained were used to develop equations to describe the wear rate of steels.
The wear losses of the specimens were expressed in terms of simultaneous contribution from the effects of rotating speed , normal load , sliding time and their interaction.
By applying the parameters such as rotating speed , normal load , and sliding time,it is observed that certain effects on the wear behavior of two types steel , the 1060 steel , sliding time is the main factor, followed by normal load and rotating speed .
However ,for the 1095 steel , rotating speed i s the main factor, followed by normal load and sliding time.
From results, it was concluded that the wear behavior of these steels and the effects of these parameters on the wear depend on the physical and mechanical properties of these types of ste
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
al-Katib, Jamal Nasir Husayn. 2015. Investigation of wear behavior of 1060 and 1095 steels using regression analysis. Engineering and Technology Journal،Vol. 33, no. 3A, pp.753-761.
https://search.emarefa.net/detail/BIM-578365
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
al-Katib, Jamal Nasir Husayn. Investigation of wear behavior of 1060 and 1095 steels using regression analysis. Engineering and Technology Journal Vol. 33, no. 3A (Mar. 2015), pp.753-761.
https://search.emarefa.net/detail/BIM-578365
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
al-Katib, Jamal Nasir Husayn. Investigation of wear behavior of 1060 and 1095 steels using regression analysis. Engineering and Technology Journal. 2015. Vol. 33, no. 3A, pp.753-761.
https://search.emarefa.net/detail/BIM-578365
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 761
رقم السجل
BIM-578365
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر