The influence of surface coating materials in reducing the corrosion of steel reinforcement in concrete
العناوين الأخرى
تأثير مواد الطلاء الأبوكسية في تقليل صدأ الحديد في الخرسانة
مقدم أطروحة جامعية
al-Nairab, Muhammad Ziyad Muhammad
مشرف أطروحة جامعية
Arafah, Muhammad Husni
al-Qudrah, Mamun Abd al-Hamid
أعضاء اللجنة
al-Tayyib, Mustafa Nasir
Shihadah, Samir Muhammad
الجامعة
الجامعة الإسلامية
الكلية
كلية الهندسة
القسم الأكاديمي
قسم الهندسة المدنية
دولة الجامعة
فلسطين (قطاع غزة)
الدرجة العلمية
ماجستير
تاريخ الدرجة العلمية
2015
الملخص الإنجليزي
This study examines the impact of Epoxy materials to minimize the corrosion of steel reinforcement through test program within three types of Epoxy materials that have been painted on the rebar and choose the best type of surface coating in minimizing the corrosion rate of steel reinforcement.
It also studies of the impact of this surface coating on the bonding strength between the rebar and the concrete on the one hand, as well as their impact on the flexural strength on the other hand.
The study seeks to fill the gap mentioned by suggesting more methods to improve the bonding between steel reinforcement and concrete.
Testing program was set up on the two main phases.
The first phase included tests to choose the best material from surface coating within three types of materials are used and the most prevalent market, while the second one covered making the necessary improvements to increase the flexural strength in addition to increasing the bending forces.
The corrosion rate result for reinforcement in beams without surface coating after 70 days was more than 50% from its weight.
However, the corrosion rate result for reinforcement in beams with surface coating type (C) "Polyurethane resin" after 70 days was 1.6 % from its weight that is the best surface coating.
Experiments show the need to use surface coating and admixture to minimize the corrosion rate and improve the flexural strength and bonding between concrete and steel reinforcement
التخصصات الرئيسية
الموضوعات
عدد الصفحات
63
قائمة المحتويات
Table of contents.
Abstract.
Abstract in Arabic.
Chapter One : Introduction.
Chapter Two : Literature review.
Chapter Three : Materials and experimental investigation.
Chapter Four : Test results and analysis.
Chapter Five : Conclusion and recommendation.
References.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
al-Nairab, Muhammad Ziyad Muhammad. (2015). The influence of surface coating materials in reducing the corrosion of steel reinforcement in concrete. (Master's theses Theses and Dissertations Master). Islamic University, Palestine (Gaza Strip)
https://search.emarefa.net/detail/BIM-611293
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
al-Nairab, Muhammad Ziyad Muhammad. The influence of surface coating materials in reducing the corrosion of steel reinforcement in concrete. (Master's theses Theses and Dissertations Master). Islamic University. (2015).
https://search.emarefa.net/detail/BIM-611293
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
al-Nairab, Muhammad Ziyad Muhammad. (2015). The influence of surface coating materials in reducing the corrosion of steel reinforcement in concrete. (Master's theses Theses and Dissertations Master). Islamic University, Palestine (Gaza Strip)
https://search.emarefa.net/detail/BIM-611293
لغة النص
الإنجليزية
نوع البيانات
رسائل جامعية
رقم السجل
BIM-611293
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر