Microstructural characterization of electroformed nickel and its composites
العناوين الأخرى
خصاص التركيب الدقيق للنيكل المشكل كهربائيا مع متراكباته
المؤلفون المشاركون
Abd al-Nur, Sabah S.
Jalil, Mufid A. L.
المصدر
Engineering and Technology Journal
العدد
المجلد 28، العدد 05 (31 يناير/كانون الثاني 2010)، ص ص. 908-917، 10ص.
الناشر
تاريخ النشر
2010-01-31
دولة النشر
العراق
عدد الصفحات
10
التخصصات الرئيسية
الموضوعات
الملخص AR
في هذا العمل تم تطوير وسط النيكل المعدني باستخدام تقنية التشكيل الكهروميكانيكي، إذا تم بناء وسط النيكل حول ألياف الكربون التي استخدمت كمواد تدعيم، بأسماك مختلفة و بكسور حجميه مختلفة.
أظهرت التحليلات المجهرية أن لشروط الترسيب التجريبية تأثير بارز على التركيب الدقيق للمتراكبات.
فقد وجد أن الحجم الحبيبي للنيكل المترسب (من التركيب الدقيق) تتغير عكسيا مع مقدار كثافة التيار الكهربائي للترسيب.
كذلك فان لدرجة حرارة محلول الترسيب تأثير ينعكس بصورة واضحة على التركيب الدقيق للأساس المعدني (matrix)، إذ أن الترسيب عند درجات حرارة المحلول المرتفعة و المنخفضة نسبيا ينتج عنها تركيب حبيبي ناعم، بينما الترسيب عند درجة حرارة متوسطة (°c50) ينتج عنه حجوم حبيبية كبيرة.
كما وجد أن للمعاملات الثيرموميكانيكيه أثر في تغير التركيب الدقيق بطريقة أسهمت في خفض نسبة المسامات عند درجة حرارة (650°c)، و بالمثل فإن عملية الطرق التي أجريت عند درجات حرارية مختلفة على المتراكبات المشكلة كهربائيا تميل إلى خفض نسبه المسامات بنسب ملحوظة اعتماد على درجة حرارة عملية الطرق.
الملخص EN
In the present work the nickel metal matrix was developed by electrochemical forming technique, were the nickel matrix is built around the reinforced carbon fiber in various thicknesses and fiber volume fractions.
The metallographic analysis indicate that the experimental depositing condition have a dominating effect on the observed composite microstructure.
The grain size of the deposited nickel is found (from the microstructure) to vary inversely with the amount of the depositing electrical current density.
Also the temperature of the solution seem to reflect quite well on the microstructure of the metal matrix, were relatively high and low solution temperature produced rather refined grain structure, while an intermediate temperature of (50°C) is found to deposited courser grain size. Secondary thermal and mechanical treatments are found to modify the microstructure in a way that higher annealing temperatures tend to enhanced the grain growth process and tend to reduced apparent porosity at (650°C), similarly the forging of the electroformed composites made at different temperature tend to reduced the internal porosity, by a notable ratio, depending on the temperature of the forging process.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Jalil, Mufid A. L.& Abd al-Nur, Sabah S.. 2010. Microstructural characterization of electroformed nickel and its composites. Engineering and Technology Journal،Vol. 28, no. 05, pp.908-917.
https://search.emarefa.net/detail/BIM-63412
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Jalil, Mufid A. L.& Abd al-Nur, Sabah S.. Microstructural characterization of electroformed nickel and its composites. Engineering and Technology Journal Vol. 28, no. 05 (2010), pp.908-917.
https://search.emarefa.net/detail/BIM-63412
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Jalil, Mufid A. L.& Abd al-Nur, Sabah S.. Microstructural characterization of electroformed nickel and its composites. Engineering and Technology Journal. 2010. Vol. 28, no. 05, pp.908-917.
https://search.emarefa.net/detail/BIM-63412
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 912
رقم السجل
BIM-63412
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر