Development of high-performance heavy density concrete using different aggregates for gamma-ray shielding

الملخص EN

The performance requirements of the concrete of containment structures are mainly radiological protection, structural integrity, durability, etc.

For this purpose, high-performance heavy density concrete can be used.

After extensive trials and errors, 15 concrete mixes were prepared by using coarse aggregates of barite, magnetite, goethite and serpentine with an addition of 10 % silica fume (SF), 20 % fly ash (FA) and 30 % ground granulated blast furnace slag (GGBFS) to the total content of OPC.

The compressive strength of hardened concrete was determined after 7, 28 and 90 days.

In some concrete mixes, compressive strength was also tested up to 90 days upon replacing sand with the fine portions of magnetite, barite and goethite.

The results revealed that, the concrete mixes containing magnetite coarse aggregate with 10 % SF reaches the highest compressive strength values exceeding over the M60 requirement by 14 % after 28 days.

Whereas, the compressive strength of concrete containing barite aggregate was very close to M60 concrete and exceeds for 90 days.

The results also indicated that, the compressive strength of the high-performance concrete incorporating magnetite as fine aggregate was significantly higher than that containing sand by 23%.

Also, concrete made with magnetite fine aggregate has higher physico-mechanical properties than those containing barite and goethite.

High-performance concrete incorporating magnetite as fine aggregate enhances the shielding efficiency against c-rays.