Numerical and experimental analysis of aircraft wing subjected to fatigue loading

الملخص EN

This study deals with the aircraft wing analysis (numerical and experimental) which subjected to fatigue loading in order to analyze the aircraft wing numerically by using ANSYS 15.0 software and experimentally by using loading programs which effect on fatigue test specimens at laboratory to estimate life of used metal (aluminum alloy 7075-T651) the wing metal and compare between numerical and experimental work, as well as to formulate an experimental mathematical model which may find safe estimate for metals and most common alloys that are used to build aircraft wing at certain conditions.

In experimental work, a (34) specimen of (aluminum alloy 7075-T651) were tested using alternating bending fatigue machine rig.

The test results are ; (18) Specimen to establish the (S-N) curve and endurance limit and the other specimens used for variable amplitude tests were represented by loading programs which represents actual flight conditions.

Also it has been obtained the safe fatigue curves which are described by mathematical formulas.

ANSYS results show convergence with experimental results about cumulative fatigue damage (D), a mathematical model is proposed to estimate the life; this model gives good results in case of actual loading programs.

Also, Miner and Marsh rules are applied to the specimens and compared with the proposal mathematical model in order to estimate the life of the wing material under actual flight loading conditions, comparing results show that it is possible to depend on present mathematical model than Miner and Marsh theories because the proposal mathematical model shows safe and good results compared with experimental work results.