Properties of fired clay bricks mixed with waste glass
العناوين الأخرى
خصائص الطوب الطيني الحراري بعد خلطه مع مخلفات الزجاج
مقدم أطروحة جامعية
مشرف أطروحة جامعية
أعضاء اللجنة
Arafah, Muhammad Husni
Tayih, Ali Ibrahim
الجامعة
الجامعة الإسلامية
الكلية
كلية الهندسة
القسم الأكاديمي
قسم الهندسة المدنية
دولة الجامعة
فلسطين (قطاع غزة)
الدرجة العلمية
ماجستير
تاريخ الدرجة العلمية
2016
الملخص الإنجليزي
The concrete hollow blocks have traditionally been used as construction materials in Gaza Strip, giving people the wherewithal to construct buildings and keep themselves safe.
Nowadays, with the Israeli siege that stopped cement from entering into Gaza Strip, fired clay bricks may be used as an alternative to concrete blocks.
The production of fired clay bricks with the incorporation of wastes constitutes a positive way for the brick industry to contribute to a more sustainable construction materials.
The advantages are on one hand, a reduction of the clay extraction and, on the other minimization of wastes in landfills.
The main idea of this research is to focus on the ability of making fired clay bricks as alternative masonry units to concrete hollow blocks and enhancing their properties by adding waste glass.
The physical and mechanical properties of fired clay bricks.
Also, the effect of waste glass particle size on the properties of the fired clay brick was studied.
The results showed that the firing shrinkage, bulk density, and compressive strength of the bricks increased as the amount of waste glass content increased and firing temperature increased.
The apparent porosity and water absorption had the same pattern and they decreased with the increase of the amount of waste glass content and firing temperature.
The results also showed that the particle size of waste glass powder was very important and had a significant effect on the properties of fired clay brick; the finest the particle size, the highest the compressive strength.
The optimal properties of fired brick were found at 30% content of waste glass and firing temperature at 1100°C.
The results also implied that it is possible to make bricks with compressive strength of 96.37 MPa and water absorption of 5.93%.
Finally, based on the results of this study, use of waste glass as a brick additive is recommended.
التخصصات الرئيسية
عدد الصفحات
79
قائمة المحتويات
Table of contents.
Abstract.
Abstract in Arabic.
Chapter One : Introduction.
Chapter Two : Literature review.
Chapter Three : Experimental program.
Chapter Four : Test results and discussion.
Chapter Five : Conclusions and recommendations.
References.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Abidin, Hisham Husayn Abidin. (2016). Properties of fired clay bricks mixed with waste glass. (Master's theses Theses and Dissertations Master). Islamic University, Palestine (Gaza Strip)
https://search.emarefa.net/detail/BIM-727130
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Abidin, Hisham Husayn Abidin. Properties of fired clay bricks mixed with waste glass. (Master's theses Theses and Dissertations Master). Islamic University. (2016).
https://search.emarefa.net/detail/BIM-727130
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Abidin, Hisham Husayn Abidin. (2016). Properties of fired clay bricks mixed with waste glass. (Master's theses Theses and Dissertations Master). Islamic University, Palestine (Gaza Strip)
https://search.emarefa.net/detail/BIM-727130
لغة النص
الإنجليزية
نوع البيانات
رسائل جامعية
رقم السجل
BIM-727130
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر