Optimization of surface roughness for al-alloy in electro-chemical machining (ECM) using Taguchi method
العناوين الأخرى
أمثليه الخشونة السطحية في التشغيل الكهروكيمياوي باستخدام طريقة تاكوشي
المؤلفون المشاركون
Abd Allah, Mustafa Adil
Ghazi, Safa Kazim
Ghadib, Shukri Hamid
المصدر
العدد
المجلد 23، العدد 10 (31 أكتوبر/تشرين الأول 2017)، ص ص. 62-71، 10ص.
الناشر
تاريخ النشر
2017-10-31
دولة النشر
العراق
عدد الصفحات
10
التخصصات الرئيسية
الموضوعات
الملخص EN
Electro-chemical Machining is significant process to remove metal with using anodic dissolution.
Electro-chemical machining use to removed metal workpiece from (7025) aluminum alloy using Potassium chloride (KCl) solution .The tool used was made from copper.
In this present the optimize processes input parameter use are (current, gap and electrolyte concentration) and surface roughness (Ra) as output .The experiments on electro-chemical machining with use current (30, 50, 70) A, gap (1.00, 1.25, 1.50) mm and electrolyte concentration (100, 200, 300) (g/L).
The method (ANOVA) was used to limit the large influence factors affected on surface roughness and found the current was the large influence factors with (72.17%).
The results of the optimization of comparison of experimental and prediction conditions current at level-1(30 A), gap at level-1 (1.00mm) and electrolyte concentration at level-1(100(g/L)) shown the average experiments and prediction surface roughness (1.352) and (1.399) respectively.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Abd Allah, Mustafa Adil& Ghadib, Shukri Hamid& Ghazi, Safa Kazim. 2017. Optimization of surface roughness for al-alloy in electro-chemical machining (ECM) using Taguchi method. Journal of Engineering،Vol. 23, no. 10, pp.62-71.
https://search.emarefa.net/detail/BIM-758511
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Abd Allah, Mustafa Adil…[et al.]. Optimization of surface roughness for al-alloy in electro-chemical machining (ECM) using Taguchi method. Journal of Engineering Vol. 23, no. 10 (Oct. 2017), pp.62-71.
https://search.emarefa.net/detail/BIM-758511
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Abd Allah, Mustafa Adil& Ghadib, Shukri Hamid& Ghazi, Safa Kazim. Optimization of surface roughness for al-alloy in electro-chemical machining (ECM) using Taguchi method. Journal of Engineering. 2017. Vol. 23, no. 10, pp.62-71.
https://search.emarefa.net/detail/BIM-758511
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes appendices : p. 67-71
رقم السجل
BIM-758511
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر