Study the effect of multilayer single point incremental forming on residual stresses for bottom plates
العناوين الأخرى
دراسة تأثير التشكيل النقطي التزايدي للصفائح المتعددة على الإجهادات المتبقية في الطبقة السفلية
المؤلفون المشاركون
Abd, Asil Hamad
Nuri, Muhannad Faiq
Badan, Aqil Sabri
المصدر
al-Khwarizmi Engineering Journal
العدد
المجلد 13، العدد 3 (30 سبتمبر/أيلول 2017)، ص ص. 99-107، 9ص.
الناشر
جامعة بغداد كلية هندسة الخوارزمي
تاريخ النشر
2017-09-30
دولة النشر
العراق
عدد الصفحات
9
التخصصات الرئيسية
الملخص EN
Knowing the amount of residual stresses and find technological solutions to minimize and control them during the production operation are an important task because great levels of deformation which occurs in single point incremental forming (SPIF), this induce highly non-uniform residual stresses.
In this papera propose of a method for multilayer single point incremental forming with change in thickness of the top plate (0.5, 0.7, 0.9) mm and lubrication or material between two plates(polymer, grease, grease with graphite, mos2) to knowing an effect of this method and parameters on residual stresses for the bottom plates.
Also compare these results for the bottom plates with the single plate at same thickness 0.9 mm.The results showed that when increase thickness of the top plate the value of residual stresses will decrease for bottom plates and when used graphite with grease between two plates gives less residual stresses (R.S = 60.173 MPa.) reverse when used Mos2 which will gives a larger residual stresses (R.S = 146.617 MPa.) in the bottom plate.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Abd, Asil Hamad& Badan, Aqil Sabri& Nuri, Muhannad Faiq. 2017. Study the effect of multilayer single point incremental forming on residual stresses for bottom plates. al-Khwarizmi Engineering Journal،Vol. 13, no. 3, pp.99-107.
https://search.emarefa.net/detail/BIM-767728
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Abd, Asil Hamad…[et al.]. Study the effect of multilayer single point incremental forming on residual stresses for bottom plates. al-Khwarizmi Engineering Journal Vol. 13, no. 3 (2017), pp.99-107.
https://search.emarefa.net/detail/BIM-767728
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Abd, Asil Hamad& Badan, Aqil Sabri& Nuri, Muhannad Faiq. Study the effect of multilayer single point incremental forming on residual stresses for bottom plates. al-Khwarizmi Engineering Journal. 2017. Vol. 13, no. 3, pp.99-107.
https://search.emarefa.net/detail/BIM-767728
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 106
رقم السجل
BIM-767728
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر