Prediction of surface roughness and material removal rate for 7024 AL-Alloy in EDM process
المؤلفون المشاركون
Abd Allah, Mustafa Adil
Ghazi, Safa Kazim
Ibrahim, Abbas Fadil
المصدر
Engineering and Technology Journal
العدد
المجلد 34، العدد 15A (31 ديسمبر/كانون الأول 2016)، ص ص. 2796-2804، 9ص.
الناشر
تاريخ النشر
2016-12-31
دولة النشر
العراق
عدد الصفحات
9
التخصصات الرئيسية
العلوم الهندسية والتكنولوجية (متداخلة التخصصات)
الملخص EN
This paper studies prediction the values of MRR and surface roughness in Electrical discharge operations.
It is a operation in which the material removal rate is machined with elevation spark in the midst work piece and electrode sunken through dielectric solution.Through use Taguchi found that the accuracy of the measured and prediction values that have been is 93% and 99 % for each of the MRR and surface roughness respectively.
The effect of different Electrical discharge machining factors are (Gap, pulse off time and pulse on time) to predict the (material removal rate) and (roughness).
Note that connected pole that was used is copper.
From (ANOVA) found that the large parameter effect on MRR is pulse-on 65% and pulse-off 25 % while large parameter effect for surface roughness is pulse-on 96 % .
The least influential parameter for metal removal rate is the gap and the least influential parameter for surface roughness is pulse-off and Gap.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ibrahim, Abbas Fadil& Abd Allah, Mustafa Adil& Ghazi, Safa Kazim. 2016. Prediction of surface roughness and material removal rate for 7024 AL-Alloy in EDM process. Engineering and Technology Journal،Vol. 34, no. 15A, pp.2796-2804.
https://search.emarefa.net/detail/BIM-770699
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ibrahim, Abbas Fadil…[et al.]. Prediction of surface roughness and material removal rate for 7024 AL-Alloy in EDM process. Engineering and Technology Journal Vol. 34, no. 15A (2016), pp.2796-2804.
https://search.emarefa.net/detail/BIM-770699
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ibrahim, Abbas Fadil& Abd Allah, Mustafa Adil& Ghazi, Safa Kazim. Prediction of surface roughness and material removal rate for 7024 AL-Alloy in EDM process. Engineering and Technology Journal. 2016. Vol. 34, no. 15A, pp.2796-2804.
https://search.emarefa.net/detail/BIM-770699
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 2804
رقم السجل
BIM-770699
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر