Design and experimentation of a control system implemented on raspberry Pi 3 board for photovoltaic systems using SEPIC converter
المؤلفون المشاركون
Miqoi, Sabah
al-Ougli, Abd al-Ghani
Tidhaf, Blqasim
Boutouba, Muhammad
المصدر
العدد
المجلد 13، العدد 4 (31 ديسمبر/كانون الأول 2017)، ص ص. 661-677، 17ص.
الناشر
تاريخ النشر
2017-12-31
دولة النشر
الجزائر
عدد الصفحات
17
التخصصات الرئيسية
الملخص EN
In this paper, a voltage regulation system is proposed for photovoltaic energy sources (PV), using Single-Ended Primary Inductance Converter as a DC-DC converter to feed loads working with specific input voltage.
The choose of SEPIC converter is due to the output voltage ripple of developed-type converters are usually small and can be lower than 2%, also it considered as a buck and boost converter and thereafter loads with lower or higher voltage could be powered.
Matlab Simulink is used as environment to develop control strategies to guaranties a stable voltage at the loads terminals.
Two algorithms are used to fulfill this role: A Conventional PID and PI-Fuzzy logic controller to generate the PWM signal for the SEPIC converter.
Hence, to validate the work some real-time simulations are treated by implemented the control strategies on a low-cost control board: The Raspberry Pi 3 in order to manage the operation of system and collecting the simulation data.
Also, and for verification purposes, several simulations were treated to verify the good behavior of the proposed system.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Boutouba, Muhammad& al-Ougli, Abd al-Ghani& Miqoi, Sabah& Tidhaf, Blqasim. 2017. Design and experimentation of a control system implemented on raspberry Pi 3 board for photovoltaic systems using SEPIC converter. Journal of Electrical Systems،Vol. 13, no. 4, pp.661-677.
https://search.emarefa.net/detail/BIM-792806
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Boutouba, Muhammad…[et al.]. Design and experimentation of a control system implemented on raspberry Pi 3 board for photovoltaic systems using SEPIC converter. Journal of Electrical Systems Vol. 13, no. 4 (2017), pp.661-677.
https://search.emarefa.net/detail/BIM-792806
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Boutouba, Muhammad& al-Ougli, Abd al-Ghani& Miqoi, Sabah& Tidhaf, Blqasim. Design and experimentation of a control system implemented on raspberry Pi 3 board for photovoltaic systems using SEPIC converter. Journal of Electrical Systems. 2017. Vol. 13, no. 4, pp.661-677.
https://search.emarefa.net/detail/BIM-792806
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 677
رقم السجل
BIM-792806
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر