![](/images/graphics-bg.png)
Optimization of material removal rate and temperature in magnetic abrasive finishing process for stainless steel 304
العناوين الأخرى
إيجاد القيم المثلى للمعدن المزال و للحرارة خلال عملية التشغيل بالحك المغناطيسي لمعدن الفولاذ 304
المؤلفون المشاركون
Murad, Hanan Hasan
Kazim, Ali Husayn
المصدر
al-Khwarizmi Engineering Journal
العدد
المجلد 13، العدد 4 (31 ديسمبر/كانون الأول 2017)، ص ص. 22-29، 8ص.
الناشر
جامعة بغداد كلية هندسة الخوارزمي
تاريخ النشر
2017-12-31
دولة النشر
العراق
عدد الصفحات
8
التخصصات الرئيسية
العلوم الهندسية والتكنولوجية (متداخلة التخصصات)
الملخص EN
The effect of the magnetic abrasive finishing (MAF) method on the temperature rise (TR), and material removal rate (MRR) has been investigated in this paper.
Sixteen runs were to determine the optimum temperature in the contact area (between the abrasive powder and surface of workpiece) and the MRR according to Taguchi orthogonal array (OA).
Four variable technological parameters (cutting speed, finishing time, working gap, and the current in the inductor) with four levels for each parameter were used, the matrix is known as a L16 (44) OA.
The signal to noise ratio (S/N) ratio and analysis of the variance (ANOVA) were utilized to analyze the results using (MINITAB17) to find the optimum condition and identify the significant parameters affecting on the TR., and MRR of the steel 304.
IR camera was used to measure the experimental temperature.
The results showed that the optimum temperature in contact area of workpiece is 70.7 °C.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Kazim, Ali Husayn& Murad, Hanan Hasan. 2017. Optimization of material removal rate and temperature in magnetic abrasive finishing process for stainless steel 304. al-Khwarizmi Engineering Journal،Vol. 13, no. 4, pp.22-29.
https://search.emarefa.net/detail/BIM-796780
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Kazim, Ali Husayn& Murad, Hanan Hasan. Optimization of material removal rate and temperature in magnetic abrasive finishing process for stainless steel 304. al-Khwarizmi Engineering Journal Vol. 13, no. 4 (2017), pp.22-29.
https://search.emarefa.net/detail/BIM-796780
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Kazim, Ali Husayn& Murad, Hanan Hasan. Optimization of material removal rate and temperature in magnetic abrasive finishing process for stainless steel 304. al-Khwarizmi Engineering Journal. 2017. Vol. 13, no. 4, pp.22-29.
https://search.emarefa.net/detail/BIM-796780
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 28
رقم السجل
BIM-796780
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)