Studying of mechanical properties for AlSiC composites
المؤلفون المشاركون
المصدر
Engineering and Technology Journal
العدد
المجلد 35، العدد 2B (28 فبراير/شباط 2017)، ص ص. 91-95، 5ص.
الناشر
تاريخ النشر
2017-02-28
دولة النشر
العراق
عدد الصفحات
5
التخصصات الرئيسية
العلوم الهندسية والتكنولوجية (متداخلة التخصصات)
الملخص EN
This search include to produce Al-SiC composites, containing two different weight percentages 25%, 50%, of SiC and sintering at three different temperatures (300,400,600) ̊C have been fabricated by powder metallurgy method.
Wear,Vickers microhardness characteristics of Al–SiC composites have been tested, in Wear test has been investigated under sliding conditions and compared with those observed in pure aluminum.
Wear sliding tests have been carried out using pin-on-disk wear test rate normal loads of 500 g and at constant sliding velocity of 500 rpm.
While in Vickers test the load that are used 50 g, 0.49N for 15 sec.,Weight loss of samples was measured and the variation of cumulative Wear loss with increasing temperature and with SiC additives has been found for both pure aluminum and the composites.
It was also observed that the Wear rate varies with normal load and found that a better values in addition 1g in SiC composites at 600̊C but lower in composites of 25% and in pure Al at other sintering temperature, on the other hands it’s found a fluctuation in (600,400,300)̊C, at 25 % at 5min, 3min.this return to the same reason of adhesive wear and its type.
in Vickers micro hardness has high values for 600̊C , for both pure Al and Al SiC composite, and this fluctuation also seen in time of wear rates that be lower value in 1min., 5 min.
while in 3 min.
has a high value,
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Hasan, Z. K.& Husayn, S. M.. 2017. Studying of mechanical properties for AlSiC composites. Engineering and Technology Journal،Vol. 35, no. 2B, pp.91-95.
https://search.emarefa.net/detail/BIM-808641
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Hasan, Z. K.& Husayn, S. M.. Studying of mechanical properties for AlSiC composites. Engineering and Technology Journal Vol. 35, no. 2B (2017), pp.91-95.
https://search.emarefa.net/detail/BIM-808641
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Hasan, Z. K.& Husayn, S. M.. Studying of mechanical properties for AlSiC composites. Engineering and Technology Journal. 2017. Vol. 35, no. 2B, pp.91-95.
https://search.emarefa.net/detail/BIM-808641
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes appendix : p. 95
رقم السجل
BIM-808641
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر