Investigation of CNC milling machining parameters on surface roughness
العناوين الأخرى
تأثير متغيرات التشغيل في مكائن التفريز المبرمجة على الخشونة السطحية
المؤلف
المصدر
al-Khwarizmi Engineering Journal
العدد
المجلد 14، العدد 3 (30 سبتمبر/أيلول 2018)، ص ص. 123-128، 6ص.
الناشر
جامعة بغداد كلية هندسة الخوارزمي
تاريخ النشر
2018-09-30
دولة النشر
العراق
عدد الصفحات
6
التخصصات الرئيسية
الملخص EN
Milling Machining is a widely accepted nontraditional machining technique used to produce parts with complex shapes and configurations.
The material is removed in two stages roughing and finishing, the flat end cutter removed the unwanted part of material, then finished by end mill cutter.
In milling technique, the role of machining factors such as cutting depth, spindle speed and feed has been studied using Taguchi technique to find its effectiveness on surface roughness.
Practical procedure is done by Taguchi Standard matrix.
CNC milling is the most conventional process which is used for removing of material from workpiece to perform the needed shapes.
The results and relations indicate that the rate of feed is very important factor for modeling surface roughness.
The plot of S/N ratio shows that the optimum combination of the milling factors that gives the best value of surface accuracy.
The best combination of milling factors has also been predicted to minimize the surface roughness.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ilyas, Rasha Ramiz. 2018. Investigation of CNC milling machining parameters on surface roughness. al-Khwarizmi Engineering Journal،Vol. 14, no. 3, pp.123-128.
https://search.emarefa.net/detail/BIM-832165
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ilyas, Rasha Ramiz. Investigation of CNC milling machining parameters on surface roughness. al-Khwarizmi Engineering Journal Vol. 14, no. 3 (Sep. 2018), pp.123-128.
https://search.emarefa.net/detail/BIM-832165
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ilyas, Rasha Ramiz. Investigation of CNC milling machining parameters on surface roughness. al-Khwarizmi Engineering Journal. 2018. Vol. 14, no. 3, pp.123-128.
https://search.emarefa.net/detail/BIM-832165
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 127
رقم السجل
BIM-832165
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر