![](/images/graphics-bg.png)
Studying the improvement of tensile strength of low alloy high strength steel welds using an economical technique
العناوين الأخرى
دراسة تحسين مقاومة شد ملحومات الفولاذ الواطئ السبائك العالي المقاومة باستخدام تقنية اقتصادية
المؤلف
al-Kilabi, Abd al-Sami Jasim Abd al-Zahrah
المصدر
The Iraqi Journal for Mechanical and Materials Engineering
العدد
المجلد 18، العدد 3 (30 سبتمبر/أيلول 2018)، ص ص. 498-505، 8ص.
الناشر
تاريخ النشر
2018-09-30
دولة النشر
العراق
عدد الصفحات
8
التخصصات الرئيسية
الملخص EN
Low alloy steels are particularly used in manufacturing several parts in the heavy engineering industries, agricultural equipment and dies which may be subject to service failure, and thus may need to be repaired by one of the welding processes.
The weldability of steels is determined by their sensitivity to cracks that can be prevented by the use of special welding procedures which are often expensive and difficult to use.
Manual metal arc welding of low alloy high strength steels was done firstly, using a cheap electrode (OK 46.00), followed by the use of an economical technique which depends on coiling copper wires with different diameters around the cheap electrode.
The expensive electrode (OK 73.68) was also used for comparison.
Results showed an increase in the tensile strength (712 MPa) and weld joint efficiency (83.8%) when the expensive iron powder low hydrogen covering electrode (OK 73.68) was used.
On the other hand, the tensile strength was decreased to (206 MPa) and the weld joint efficiency to (24.2%) when the cheap electrode (OK 46.00) was used.
Coiling a (0.6 mm) dia.
copper wire around the (OK 46.00) electrode increased the tensile strength and weld joint efficiency to (510 MPa) and (60%) respectively.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
al-Kilabi, Abd al-Sami Jasim Abd al-Zahrah. 2018. Studying the improvement of tensile strength of low alloy high strength steel welds using an economical technique. The Iraqi Journal for Mechanical and Materials Engineering،Vol. 18, no. 3, pp.498-505.
https://search.emarefa.net/detail/BIM-832457
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
al-Kilabi, Abd al-Sami Jasim Abd al-Zahrah. Studying the improvement of tensile strength of low alloy high strength steel welds using an economical technique. The Iraqi Journal for Mechanical and Materials Engineering Vol. 18, no. 3 (Sep. 2018), pp.498-505.
https://search.emarefa.net/detail/BIM-832457
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
al-Kilabi, Abd al-Sami Jasim Abd al-Zahrah. Studying the improvement of tensile strength of low alloy high strength steel welds using an economical technique. The Iraqi Journal for Mechanical and Materials Engineering. 2018. Vol. 18, no. 3, pp.498-505.
https://search.emarefa.net/detail/BIM-832457
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 504-505
رقم السجل
BIM-832457
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)