Effect of friction stir processing on microstructure and microhardness of the 6061 aluminum alloy reinforced with SiCp
العناوين الأخرى
تأثير عملة الرج بالاحتكاك على التركب الحبيبي و الصلادة لسبيكة الالمنيوم 6061 بعد تسليحها بمادة السليكون كاربيد
المؤلفون المشاركون
Hamid, Qasim Kazim
Musa, Kanan Muhammad
Dawud, Hasan Isa
المصدر
Journal of al-Qadisiyah for Pure Science
العدد
المجلد 22، العدد 2 (30 يونيو/حزيران 2017)6ص.
الناشر
تاريخ النشر
2017-06-30
دولة النشر
العراق
عدد الصفحات
6
التخصصات الرئيسية
العلوم الهندسية والتكنولوجية (متداخلة التخصصات)
الملخص EN
The performance of this study shows that SiCp of particle size 1μm was dispersed into the surface layer of 6061 aluminum alloy sheet by friction stir processing (FSP) technique.
The process parameters are rotational speed, traverse speed and axial force and all these parameters kept constant at 1750 rpm, 50 mm/min and 4 kN, respectively.
All the specimens were subjected to different numbers of FSP (1 to 3 passes).
The effect of FSP passes on the surface metal matrix composites was investigated.
The microstructure across the stir zone (SZ) was evaluated by using an optical microscope, and the results showed a banded structure from the particle-rich and particle-free regions of the SiCp.
Significant variation in microhardness value of the surface metal matrix composites was observed due to the variation of FSP passes.
Higher microhardness value was exhibited when the surface composites were fabricated after 3-pass FSP.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Dawud, Hasan Isa& Hamid, Qasim Kazim& Musa, Kanan Muhammad. 2017. Effect of friction stir processing on microstructure and microhardness of the 6061 aluminum alloy reinforced with SiCp. Journal of al-Qadisiyah for Pure Science،Vol. 22, no. 2.
https://search.emarefa.net/detail/BIM-850962
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Dawud, Hasan Isa…[et al.]. Effect of friction stir processing on microstructure and microhardness of the 6061 aluminum alloy reinforced with SiCp. Journal of al-Qadisiyah for Pure Science Vol. 22, no. 2 (2017).
https://search.emarefa.net/detail/BIM-850962
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Dawud, Hasan Isa& Hamid, Qasim Kazim& Musa, Kanan Muhammad. Effect of friction stir processing on microstructure and microhardness of the 6061 aluminum alloy reinforced with SiCp. Journal of al-Qadisiyah for Pure Science. 2017. Vol. 22, no. 2.
https://search.emarefa.net/detail/BIM-850962
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
رقم السجل
BIM-850962
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر