Fabrication, design and analysis of waste chicken feathers fibers composites for automotive indoors
المؤلفون المشاركون
al-Baji, Ammar Jabbar
Abd Allah, Asil Mahmud
Hashim, Ahmad Muzaffar
المصدر
ZANCO Journal of Pure and Applied Sciences
الناشر
جامعة صلاح الدين قسم النشر العلمي
تاريخ النشر
2019-06-30
دولة النشر
العراق
عدد الصفحات
6
التخصصات الرئيسية
العلوم الهندسية والتكنولوجية (متداخلة التخصصات)
الملخص الإنجليزي
The rapidly increasing in pollution problems and its impact on the global climate and the need to find environmentally friendly materials to reduce this negative phenomenon, especially synthetic fiber polymer based composites that enter in automotive industry has led to attention to use natural fibers extracted from renewable sources.
This work introduced a new environmentally composites for automotive indoors as the best choice than traditional polypropylene consist of waste chicken feathers fibers and epoxy resin.
The concentrations of reinforcement phase are respectively 2, 4, 6, and 8 %wt.
The fabrication technique of composites can be done by hand lay-up.
The tensile and flexural behaviors of samples were analyzed.
The experimental results indicated that there is not effect on tensile strength when added 2 wt% of chicken feathers fibers to epoxy.
As weight fraction of CFF increased the tensile strength of composites increased to maximum value 25.9 MPa for 4 %wt CFF.
The results also shown there is clearly effect on flexural strength when added of chicken feathers fibers to epoxy.
As weight fraction of CFF increased the flexural strength of composites increased to maximum value 98.2 MPa for 4 %wt CFF.
نوع البيانات
أوراق مؤتمرات
رقم السجل
BIM-894443
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Hashim, Ahmad Muzaffar& Abd Allah, Asil Mahmud& al-Baji, Ammar Jabbar. 2019-06-30. Fabrication, design and analysis of waste chicken feathers fibers composites for automotive indoors. International Conference on Engineering and Innovative Technology (2 : 2019 : Irbil, Iraq). . Vol. 31, no. 3 (Supplement) (2019), pp.137-142.Irbil Iraq : Salahaddin University-Erbil Department of Scientific Publications.
https://search.emarefa.net/detail/BIM-894443
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Hashim, Ahmad Muzaffar…[et al.]. Fabrication, design and analysis of waste chicken feathers fibers composites for automotive indoors. . Irbil Iraq : Salahaddin University-Erbil Department of Scientific Publications. 2019-06-30.
https://search.emarefa.net/detail/BIM-894443
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Hashim, Ahmad Muzaffar& Abd Allah, Asil Mahmud& al-Baji, Ammar Jabbar. Fabrication, design and analysis of waste chicken feathers fibers composites for automotive indoors. . International Conference on Engineering and Innovative Technology (2 : 2019 : Irbil, Iraq).
https://search.emarefa.net/detail/BIM-894443
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر