Burning velocity measurement of biodiesel fuel and its blends using particle imaging path technique and image processing

العناوين الأخرى

قياس سرعة الاحتراق لوقود الديزل الحيوي و خلائطه باستخدام تقنية تصوير مسار الجسيم و معالجة الصور

المؤلفون المشاركون

Muhammad, Amir Abd Allah
Hasan, Abd al-Khadim Muhammad
Mashkur, Mahmud Ata Allah

المصدر

Journal of Engineering and Sustainable Development

الناشر

الجامعة المستنصرية كلية الهندسة

تاريخ النشر

2018-03-31

دولة النشر

العراق

عدد الصفحات

18

التخصصات الرئيسية

الهندسة الميكانيكية

الملخص الإنجليزي

In present investigation an air-blast atomizer was designed and developed for fuel atomization which is used in liquid fuel burner.

The burning velocity was measured experimentally.

The experiments have been performed for different liquid fuel types, air to liquid mass flow rates (ALR) and equivalence ratio (φ) to study the effects of these parameters on burning velocity (BV).

The liquid fuels used during the tests are biodiesel (sunflower fatty acid methyl ester SME) and its blends (biodiesel-diesel Bx and biodiesel-kerosene Bkx) with three values of ALR (0.6, 0.8 and 1.0) for five values of φ (0.6, 0.8, 1.0, 1.2 and 1.4).The flames images were investigated for the region before the flame front by using imaging setup and using particle image path (PIP) with dispersion techniques.

The image viewing regions is 366.6 mm2 for determine the (BV).

Matlab cod software has been used for a number of image processing techniques to identify and improve the detection of the path of particles movements.

The results showed that the increasing of biodiesel ratio in blending with diesel and kerosene decreases the (BV), and the increasing of ALR increases the (BV) for all experiments fuels.

Also the results showed that the agreement is good of this method of (BV) measurement with published studies.

نوع البيانات

أوراق مؤتمرات

رقم السجل

BIM-906806

• APA
• MLA
• AMA