Mathematical modeling for water hammer in pipe flow
العناوين الأخرى
التمثيل الرياضي للمطرقة المائية في أنابيب الجريان
المؤلفون المشاركون
Jalut, Qasim H.
Rashid, Nisrin J.
المصدر
Journal of Engineering and Sustainable Development
العدد
المجلد 22، العدد 1 (31 يناير/كانون الثاني 2018)، ص ص. 95-108، 14ص.
الناشر
الجامعة المستنصرية كلية الهندسة
تاريخ النشر
2018-01-31
دولة النشر
العراق
عدد الصفحات
14
التخصصات الرئيسية
الملخص EN
Water hammer phenomenon is a transient flow in pipes that was created by rapid changes of velocity in pipelines.
this phenomenon can be caused strong positive and negative pressures in water pipelines.
overall, water hammer creates by suddenly closing valves, shutting off or suddenly restarting pumps.
in this study, momentum (EULER) and continuity equations of water hammer is numerically simulated using matlab software.
sensitivity analysis has been investigated using several variables such as pipe diameter, wave’s velocity and friction factor.
method of characteristics (MOC) has been implemented in this study.
through the results obtained, it has been shown that when using pipe with diameter (1.2m) instead of (1m), the maximum pressure head decreased by 31.5%, and decreased by 47.7% in the case of using (1.4m) instead of (1m).
in case of changing the values of friction factors, it has been shown that the maximum pressure head decreased by 0.86% when using the friction factor value (0.008) instead of (0.007), and decreased by 0.81% when using friction factor value (0.009) instead of (0.007).
while for the effect of wave's velocity on the pressure head, it has been shown that the maximum pressure head increased by (10.6%) when using the wave's velocity (300 m/sec) instead of (250 m/sec) and increased by (19.13%) when using (350 m/sec) instead of (250 m/sec) and increased by (26.1%) when using (400 m/sec) instead of (250 m/sec).
also, it has been found that the ending section of pipe is the critical zone for water hammer.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Jalut, Qasim H.& Rashid, Nisrin J.. 2018. Mathematical modeling for water hammer in pipe flow. Journal of Engineering and Sustainable Development،Vol. 22, no. 1, pp.95-108.
https://search.emarefa.net/detail/BIM-908750
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Jalut, Qasim H.& Rashid, Nisrin J.. Mathematical modeling for water hammer in pipe flow. Journal of Engineering and Sustainable Development Vol. 22, no. 1 (Jan. 2018), pp.95-108.
https://search.emarefa.net/detail/BIM-908750
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Jalut, Qasim H.& Rashid, Nisrin J.. Mathematical modeling for water hammer in pipe flow. Journal of Engineering and Sustainable Development. 2018. Vol. 22, no. 1, pp.95-108.
https://search.emarefa.net/detail/BIM-908750
نوع البيانات
مقالات
لغة النص
الإنجليزية
رقم السجل
BIM-908750
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر