![](/images/graphics-bg.png)
Optimization of EDM process factors for machining Al-Si Alloy using response surface methodology
العناوين الأخرى
الأمثلية لمتغيرات عملية تشغيل EDM لسبيكة الألمنيوم سيليكون (Al-Si) باستخدام طريقة استجابة السطح (RSM)
المؤلفون المشاركون
Talib, Nada H.
al-Shafii, Sad Hamid
المصدر
Journal of University of Babylon for Engineering Sciences
العدد
المجلد 26، العدد 10 (31 أكتوبر/تشرين الأول 2018)، ص ص. 217-228، 12ص.
الناشر
تاريخ النشر
2018-10-31
دولة النشر
العراق
عدد الصفحات
12
التخصصات الرئيسية
الملخص EN
This work exhibits an incorporated way to deal with the procedure demonstrating and multi-target improvement of EDM parameters of Al-Si based on response surface methodology (RSM) combined with desirability function (DF) method.
The’ effect’ of’ process’ parameters for’ example, pulse current (Ip), pulse’ on’ time’ (Ton) as well as pulse’ off’ time’ (Toff) on’ metal removal’ rate’ (MRR), electrode’ wear’ rate’ (EWR) and’ surface’ roughness’ (Ra), were analyzed.
An extensive investigation of difference (ANOVA) at fixed indicative level of 5%, was done to completely distinguish the most persuasive parameters, and the sufficiency of all fitted relapse models were checked.
To completely comprehend the trademark machinability conduct under various EDM conditions, fundamental effect investigation.
The results indicate that MRR increases with the rising Ip and Ton.
Low EWR and Ra can be acquired by diminishing Ip and Ton.
Be that as it may, the Ip is the most commanding parameter pursued by Ton and Toff for MRR and Ra whereas in the EWR, the Ip is the foremost factor, followed by the Toff and Ton.
Lastly, a multi-optimization way dependent upon the desirability function (DF) idea was used to discover ideal blends of machining parameters so that it was capable to produce the the most extreme estimation of MRR and least estimations of EWR and Ra, inside the noteworthy information parameters.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
al-Shafii, Sad Hamid& Talib, Nada H.. 2018. Optimization of EDM process factors for machining Al-Si Alloy using response surface methodology. Journal of University of Babylon for Engineering Sciences،Vol. 26, no. 10, pp.217-228.
https://search.emarefa.net/detail/BIM-917894
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
al-Shafii, Sad Hamid& Talib, Nada H.. Optimization of EDM process factors for machining Al-Si Alloy using response surface methodology. Journal of University of Babylon for Engineering Sciences Vol. 26, no. 10 (2018), pp.217-228.
https://search.emarefa.net/detail/BIM-917894
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
al-Shafii, Sad Hamid& Talib, Nada H.. Optimization of EDM process factors for machining Al-Si Alloy using response surface methodology. Journal of University of Babylon for Engineering Sciences. 2018. Vol. 26, no. 10, pp.217-228.
https://search.emarefa.net/detail/BIM-917894
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 226-227
رقم السجل
BIM-917894
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)