![](/images/graphics-bg.png)
Experimental study to design and manufacturing of NACA 0012 horizontal axis wind turbine blade
العناوين الأخرى
دراسة عملية لتصميم و تصنيع ريشة توربين ريحي أفقي المحور نوع NACA 0012
المؤلفون المشاركون
Ali, Iqbal Husayn
Yas, Muhammad Abd al-Razzaq
al-Dafai, Husayn Ali Husayn
المصدر
Journal of University of Babylon for Engineering Sciences
العدد
المجلد 26، العدد 6 (30 يونيو/حزيران 2018)، ص ص. 128-139، 12ص.
الناشر
تاريخ النشر
2018-06-30
دولة النشر
العراق
عدد الصفحات
12
التخصصات الرئيسية
الهندسة الكهربائية
الهندسة الميكانيكية
الملخص EN
In this research, the design, analysis, improvement, and manufacturing of a horizontal axis wind turbine with symmetrical blade section type (NACA 0012) airfoil have been achieved.
For better performance and behavior, it is necessary to install some parameters and controlled the others to achieve the best wind turbine performance.
Fortran 90 computer programs are used to analyze and calculate the design data as well as compare these data with the results of CFD code.
Then the optimization methods Scmitz, betz and lift/drag optimization were used to improve chord and pitch angle for a wind turbine.
Turbine blades were drawn by solidwork program, and then this data was transferred to the 3D printer to manufacture the blades.
Note that the blades were made of fiberglass material.
The results were as follows, where the Cp =0.481 at TSR=7 before optimization and after optimization, the best results were as follows Cp = 0.556 at Schmitz chord optimization and lift/drag twist optimization, Also Cp = 0.53 at Betz chord optimization and lift/drag twist optimization at same TSR
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Yas, Muhammad Abd al-Razzaq& Ali, Iqbal Husayn& al-Dafai, Husayn Ali Husayn. 2018. Experimental study to design and manufacturing of NACA 0012 horizontal axis wind turbine blade. Journal of University of Babylon for Engineering Sciences،Vol. 26, no. 6, pp.128-139.
https://search.emarefa.net/detail/BIM-917961
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Yas, Muhammad Abd al-Razzaq…[et al.]. Experimental study to design and manufacturing of NACA 0012 horizontal axis wind turbine blade. Journal of University of Babylon for Engineering Sciences Vol. 26, no. 6 (2018), pp.128-139.
https://search.emarefa.net/detail/BIM-917961
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Yas, Muhammad Abd al-Razzaq& Ali, Iqbal Husayn& al-Dafai, Husayn Ali Husayn. Experimental study to design and manufacturing of NACA 0012 horizontal axis wind turbine blade. Journal of University of Babylon for Engineering Sciences. 2018. Vol. 26, no. 6, pp.128-139.
https://search.emarefa.net/detail/BIM-917961
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 138
رقم السجل
BIM-917961
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)