Modeling of hydraulic jump generated partially on sloping apron
العناوين الأخرى
نمذجة القفزة الهيدروليكية التي تتولد جزئيا على سطح منحدر
المؤلف
المصدر
Journal of University of Babylon for Engineering Sciences
العدد
المجلد 26، العدد 1 (31 يناير/كانون الثاني 2018)، ص ص. 81-93، 13ص.
الناشر
تاريخ النشر
2018-01-31
دولة النشر
العراق
عدد الصفحات
13
التخصصات الرئيسية
العلوم الهندسية والتكنولوجية (متداخلة التخصصات)
الملخص EN
Modeling aims to characterize system behavior and achieve simulation close as possible of the reality.
The rapid energy exchange in supercritical flow to generate quiet or subcritical flow in hydraulic jump phenomenon is important in design of hydraulic structures.
Experimental and numerical modeling is done on type B hydraulic jump which starts first on sloping bed and its end on horizontal bed.
Four different apron slopes are used, for each one of these slopes the jump is generated on different locations by controlling the tail water depth.
Modelling validation is based on 120 experimental runs which they show that there is reliability.
The air volume fraction which creates in through hydraulic jump varied between 0.18 and 0.28.
While the energy exchanges process take place within 6.6, 6.1, 5.8, 5.5 of the average relative jump height for apron slopes of 0.18, 0.14, 0.10, 0.07 respectively.
Within the limitations of this study, mathematical prediction model for relative hydraulic jump height is suggested.The model having an acceptable coefficient of determination.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Jalil, Shakir Abd al-Latif. 2018. Modeling of hydraulic jump generated partially on sloping apron. Journal of University of Babylon for Engineering Sciences،Vol. 26, no. 1, pp.81-93.
https://search.emarefa.net/detail/BIM-918099
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Jalil, Shakir Abd al-Latif. Modeling of hydraulic jump generated partially on sloping apron. Journal of University of Babylon for Engineering Sciences Vol. 26, no. 1 (2018), pp.81-93.
https://search.emarefa.net/detail/BIM-918099
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Jalil, Shakir Abd al-Latif. Modeling of hydraulic jump generated partially on sloping apron. Journal of University of Babylon for Engineering Sciences. 2018. Vol. 26, no. 1, pp.81-93.
https://search.emarefa.net/detail/BIM-918099
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
رقم السجل
BIM-918099
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر