![](/images/graphics-bg.png)
The effect of pads number and their tilt angles on the bearing stiffness
العناوين الأخرى
تأثير عدد الوسادات وزوايا ميلانها على معامل نابضية المسند
المؤلف
المصدر
Tikrit Journal of Engineering Sciences
العدد
المجلد 25، العدد 4 (31 ديسمبر/كانون الأول 2018)، ص ص. 6-10، 5ص.
الناشر
تاريخ النشر
2018-12-31
دولة النشر
العراق
عدد الصفحات
5
التخصصات الرئيسية
الملخص EN
In this work a plain (conventional) and a tilted bad bearings are analyzed and studied (both have the same dimensions and work conditions).
Three, four and five pads models are studied.
The pads are fixed circumferentially in a manner each two close pads are separated with an angle that is the same for all the close pads.
Each pad is pivoted in its trailing edge and is facilitated to be tilted around this pivot with small angles.
This study was achieved for three values of tilting angles.
These angles are, 0.01o, 0.011o and 0.012o.
Two dimensions' form of Reynolds equation is used and solved numerically then the stiffness coefficients had been calculated.
A comparison had been done between the stiffness coefficients values for the two models (tilted pads and conventional bearings).
The results of this comparison was found that (for n = 0.4), are, +28%, +275%, +270 % and -100% for Ksr, Krr, Kss and Krs respectively.
It was noticed that the values of the principal coefficients Krr and Kss are increased significantly while the cross coupling coefficient, (Krs) is decreased significantly and (Ksr) is increased slightly.
And this is a positive sign for stability improvement.
Also it was found that increasing the tilt angle (delta) cause an increase of the stiffness coefficients values.
These increases (for n = 0.4 and changing the tilt angle from 0.010 to 0.011 then to 0.012 respectively) are, Krr=+50%, +47%, Kss = +40%, +32%, Ksr = +33%, +42%, and Krs = +15%, +20%.
And since increasing the values of the cross coupling coefficients make the bearing stability worse, so increasing the tilt angle is not a preferable method for improving stability.
Changing the number of pads is a better solution and it was found that three pads bearing is the best among them.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Muhsin, Ibrahim Ali. 2018. The effect of pads number and their tilt angles on the bearing stiffness. Tikrit Journal of Engineering Sciences،Vol. 25, no. 4, pp.6-10.
https://search.emarefa.net/detail/BIM-938858
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Muhsin, Ibrahim Ali. The effect of pads number and their tilt angles on the bearing stiffness. Tikrit Journal of Engineering Sciences Vol. 25, no. 4 (2018), pp.6-10.
https://search.emarefa.net/detail/BIM-938858
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Muhsin, Ibrahim Ali. The effect of pads number and their tilt angles on the bearing stiffness. Tikrit Journal of Engineering Sciences. 2018. Vol. 25, no. 4, pp.6-10.
https://search.emarefa.net/detail/BIM-938858
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
رقم السجل
BIM-938858
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)