Preparation Iraqi Attapulgite clay using wet sieving process to be suitable for oil wells drilling fluid
العناوين الأخرى
تحضير طين الأتبلغايت العراقي باستخدام عملية الغربلة الرطبة ليكون مناسبا لسوائل حفر آبار النفط
المؤلفون المشاركون
al-Wasti, Asawir Abd al-Rasul Kuwayri
Hammud, Abd al-Khaliq Fawzi
Husayn, Ahmad Fulayyih
المصدر
Journal of University of Babylon for Engineering Sciences
العدد
المجلد 27، العدد 4 (31 ديسمبر/كانون الأول 2019)، ص ص. 292-302، 11ص.
الناشر
تاريخ النشر
2019-12-31
دولة النشر
العراق
عدد الصفحات
11
التخصصات الرئيسية
الملخص EN
Wet sieving is one of active separation process for clay mineral.
In this work, wet sieving was applied to separate attapulgite clay from quartz for Iraqi formation to make it suitable in drilling fluid preparation.
The Influence of wet sieving conditions (stirring speed, stirring time and mesh size) on quality and quantity properties of attapulgite clay were investigated.
Three stirring speeds (850, 1300 and 1800 rpm) at three stirring times (5, 15 and 20min.) were tested in wet milling process, in addition to three mesh sizes (20,38 and 75µm) were applied in wet sieving process.
XRD and FE-SEM were used for mineralogical and morphological characterizing for attapulgite clay.
Rheological properties and yield of clay were tested at fresh and salt water using ofite viscometer.
Yield of the process was measured by weight differences of clay before wet sieving and after purification process.
The results showed that the stirring speed and stirring time had great action on raising the yield of process, where higher yields of process was obtained at 1800 rpm stirring speed for 20 min.
at mesh size 75 µm.
the results also showed, the mesh size had Direct proportion with a yield of process, while it had a revers fit with dispersion of attapulgite clay.
However, best apparent viscosity (15.83 and12.06 Cp) for fresh and salt water respectively, and higher yield of clay (94.21and 81.71 barrel/ton) for fresh and salt water were gained at sieving with 38 µm mesh size.
Final result, the best wet sieving condition were stirring speed1800 rpm for 20 min.
at 38 µm mesh size.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Husayn, Ahmad Fulayyih& Hammud, Abd al-Khaliq Fawzi& al-Wasti, Asawir Abd al-Rasul Kuwayri. 2019. Preparation Iraqi Attapulgite clay using wet sieving process to be suitable for oil wells drilling fluid. Journal of University of Babylon for Engineering Sciences،Vol. 27, no. 4, pp.292-302.
https://search.emarefa.net/detail/BIM-950018
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Husayn, Ahmad Fulayyih…[et al.]. Preparation Iraqi Attapulgite clay using wet sieving process to be suitable for oil wells drilling fluid. Journal of University of Babylon for Engineering Sciences Vol. 27, no. 4 (2019), pp.292-302.
https://search.emarefa.net/detail/BIM-950018
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Husayn, Ahmad Fulayyih& Hammud, Abd al-Khaliq Fawzi& al-Wasti, Asawir Abd al-Rasul Kuwayri. Preparation Iraqi Attapulgite clay using wet sieving process to be suitable for oil wells drilling fluid. Journal of University of Babylon for Engineering Sciences. 2019. Vol. 27, no. 4, pp.292-302.
https://search.emarefa.net/detail/BIM-950018
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 301
رقم السجل
BIM-950018
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر