بحثتصفح
بحث متقدم

بحث متقدم

محددات البحث

محددات الوثيقة

العبارة
تقييد النتائج
نوع البيانات
اللغة
الدولة
المصدر

نتائج البحث

   (301 - 350 من 486)
مقالات

The Effect of Calcium Formate, Sodium Sulfate, and Cement Clinker on Engineering Properties of Fly Ash-Based Cemented Tailings Backfill

By: Xu, Wenbin; Li, Qianlong; Liguori, Barbara…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-12, 12 p.

مقالات

Impact of Leather on the Fire Resistance of Leather-Wood Fibreboard: FT-IR Spectroscopy and Pyrolysis-GC-MS Investigation

By: Schnabel, Thomas; Petutschnigg, Alexander; Luo, Zhiping…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Physicochemical Performance of Portland-Rice Husk Ash-Calcined Clay-Dried Acetylene Lime Sludge Cement in Sulphate and Chloride Media

By: Wachira, Jackson Muthengia; Thiong’o, Joseph Karanja; Černý, Robert…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-12, 12 p.

مقالات

Use of Vegetation as Biomaterial for Controlling Measures of Human Impact on the Environment

By: Termini, Donatella; Kong, L. X.. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-7, 7 p.

مقالات

A Study on Depth Sizing for Surface Cracks in KTX Brake Disc Using Rayleigh Wave

By: Kang, Sung-Sik; Russo, Pietro; Sung, Deokyong…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-15, 15 p.

مقالات

Flexural Behavior of the Innovative CA-UHPC Slabs with High and Low Reinforcement Ratios

By: Feng, Yu; Qi, Jianan; Cabrera, Jose M.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-14, 14 p.

مقالات

Analysis of the Possibility of Using Energy Harvesters to Power Wearable Electronics in Clothing

By: Dąbrowska, Anna; Trzepieciński, Tomasz; Greszta, Agnieszka. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-13, 13 p.

مقالات

Features of Electro-Induced Periodical Structures in LiTaO3 Single Crystal and Their Interaction with Surface Acoustic Wave

By: Barsukou, Siarhei D.; Kondoh, Jun; Pirri, Candido F.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-12, 12 p.

مقالات

Effects of Incorporation of Marble Powder Obtained by Recycling Waste Sludge and Limestone Powder on Rheology, Compressive Strength, and Durability of Self-Compacting Concrete

By: Alyousef, Rayed; Khadimallah, Mohamed Amine; Russo, Pietro…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-15, 15 p.

مقالات

Electrocatalytic Properties of Calcium Titanate, Strontium Titanate, and Strontium Calcium Titanate Powders Synthesized by Solution Combustion Technique

By: Jongprateep, Oratai; Sato, Nicha; Techapiesancharoenkij, Ratchatee…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-7, 7 p.

مقالات

Lowering Emissivity of Concrete Roof Tile’s Underside Cuts Down Heat Entry to the Building

By: Chen, Xuejun; Wang, Lei; Qin, Yinghong…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

The Effect of CuO on the Thermal Behavior of the High-Energy Combustion Agent of the AlMnO2 System

By: Wang, Hao; Yao, Miao; Calado, Verônica Maria Araújo…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Applying the EDPS Method to the Research into Thermophysical Properties of Solid Wood of Coniferous Trees

By: Krišťák, Ľuboš; Igaz, Rastislav; Maraşlı, Necmettin…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Effects of High-Density Pulse Currents on the Solidification Structures of Cu-SiCpAZ91D Composites

By: Hao, Xi; Hao, Weixin; Li, Yugui…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-6, 6 p.

مقالات

Corrigendum to “Representative Stress-Strain Curve by Spherical Indentation on Elastic-Plastic Materials”

By: Chang, Chao; Garrido, M. A.; Ruiz-Hervias, J.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-1, 1 p.

مقالات

Influence of Hydrogen Content on the Microstructure and Mechanical Properties of ER5183 Wires

By: Han, Yilong; Xue, Songbai; Dymek, Stanislaw…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Study of Structural Properties of BiOI on ZnO Thin Films and ZnO Nanorods

By: Gutiérrez-Lazos, C. D.; Fundora, A.; Solis-Pomar, F.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Experimental Methods to Assess the Effectiveness of Soil Conditioning with Foam in Fully Weathered Granite

By: Cui, Jian; Rambo, Carlos R.; Fang, Yong…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-12, 12 p.

مقالات

Titanium Alloy Repair with Wire-Feed Electron Beam Additive Manufacturing Technology

By: Wanjara, P.; Watanabe, K.; Ferro, Paolo…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-23, 23 p.

مقالات

An Artificial Neural Network Model to Predict the Thermal Properties of Concrete Using Different Neurons and Activation Functions

By: Fidan, Sehmus; Oktay, Hasan; Maraşlı, Necmettin…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-13, 13 p.

مقالات

Structural Design of Partitioned Stator Doubly Salient Permanent Magnet Generator for Power Output Improvement

By: Sriwannarat, Warat; Siritaratiwat, Apirat; Khunkitti, Pirat…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Synthesis of Magnetic Biochar for Efficient Removal of Cr(III)‎ Cations from the Aqueous Medium

By: Frolova, Liliya; Schütze, Michael J.; Kharytonov, Mykola. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-7, 7 p.

مقالات

Effect of Sterilization on the Properties of a Bioactive Hybrid Coating Containing Hydroxyapatite

By: Baldin, E. K. K.; Malfatti, C. F.; Catauro, Michelina…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-13, 13 p.

مقالات

Computational Assessment of Thermal Conductivity of Compacted Graphite Cast Iron

By: Wu, Yue; Li, Jianping; Berthod, Patrice…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-7, 7 p.

مقالات

Influences of Vibration Parameters on Formability of 1060 Aluminum Sheet Processed by Ultrasonic Vibration-Assisted Single Point Incremental Forming

By: Yang, Mingshun; Li, Yan; Ferro, Paolo…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-12, 12 p.

مقالات

Development of a Correlation between the Resilient Modulus and CBR Value for Granular Blends Containing Natural Aggregates and RAPRCA Materials

By: Arshad, Muhammad; Pettinari, Claudio. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-16, 16 p.

مقالات

Simultaneous Determination of Amlodipine, Hydrochlorothiazide, and Valsartan in Pharmaceutical Products by a Combination of Full Spectrum Measurement and Kalman Filter Algorithm

By: Quynh Trang, Nguyen Thi; Van Hop, Nguyen; Mai, Hien Duy…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Comparison of Micro-EDM Characteristics of Inconel 706 between EDM Oil and an Al Powder-Mixed Dielectric

By: Wang, Chenxue; Zhu, Hongtao; Qiang, Zhang. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-11, 11 p.

مقالات

Performance Damage Characteristics of Asphalt Binder Suffered from the Action of Sulfate

By: Xiong, Rui; Wu, Jiayu; Zhou, Wei…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Effect of Rare Earth Ce on the Microstructure and Mechanical Properties of 34CrNiMo6 Steel for Wind Turbine Main Shaft

By: Ge, Yanming; Yao, Zhonghua; Wang, Kehong. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Microstructure Characteristics of GFRP Reinforcing Bars in Harsh Environment

By: El-Hassan, Hilal; Šišková, Alena; El Maaddawy, Tamer. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-19, 19 p.

مقالات

Enhanced Device Performance of Bulk Heterojunction (BHJ)‎ Hybrid Solar Cells Based on Colloidal CdSe Quantum Dots (QDs)‎ via Optimized Hexanoic Acid-Assisted Washing Treatment

By: Madsuha, Alfian F.; Yuwono, Akhmad H.; Martucci, A.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-6, 6 p.

مقالات

Surface Laser Processing of Additive Manufactured 1.2709 Steel Parts: Preliminary Study

By: Černašėjus, O.; Škamat, J.; Kimura, Akihiko…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Constructing a Method for an Evaluation Index System Based on Graph Distance Classification and Principal Component Analysis

By: Zhang, Zhi-jun; Yu, Qing; Miroshnichenko, Andrey E.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Recent Advances in Characterization Techniques for the Interface in Carbon Nanotube-Reinforced Polymer Nanocomposites

By: Chen, Junjie; Gao, Xuhui; Šišková, Alena…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-24, 24 p.

مقالات

Rockburst in Sandstone Containing Elliptic Holes with Varying Axial Ratios

By: He, Manchao; Lusquiños, Fernando; Gao, Yubing…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-17, 17 p.

مقالات

Experimental Verification of Impact of Sprinkled Area Length on Heat Exchange Coefficient

By: Kracik, Petr; Balas, Marek; Liang, Guang-xing…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-7, 7 p.

مقالات

Temperature Field and Optimal Design of Duct-Ventilated Tower Foundation in Permafrost Regions

By: Liu, Fengyun; Shao, Zhushan; Lusquiños, Fernando…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-13, 13 p.

مقالات

Effect of Bedding Angle and Confining Pressure on the Brittleness of Geomaterials: A Case Study on Slate

By: Hao, Xianjie; Xu, Quansheng; Liu, Jun…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-17, 17 p.

مقالات

Mechanical Properties and Failure Modes of Rock Specimens with Specific Joint Geometries in Triaxial Unloading Compressive Test

By: Li, Jian-Lin; Liu, Jun; Sun, Xushu…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-14, 14 p.

مقالات

Heat-Treated Wood as a Substrate for Coatings, Weathering of Heat-Treated Wood, and Coating Performance on Heat-Treated Wood

By: Jirouš-Rajković, Vlatka; Cannas, Marco; Miklečić, Josip. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Rutting and Fatigue Properties of Cellulose Fiber-Added Stone Mastic Asphalt Concrete Mixtures

By: Irfan, Muhammad; Wang, Hainian; Nazzal, Munir…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

New Textile Composite Solutions for Armouring of Vehicles

By: Boussu, F.; Provost, B.; Boccaccio, Antonio…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-14, 14 p.

مقالات

Optimization of Low-Carbon Footprint Quaternary and Quinary (37% Fly Ash)‎ Cementitious Nanocomposites with Polycarboxylate or Aqueous Nanosilica Particles

By: Papatzani, Styliani; Pitsikalis, Marinos; Paine, Kevin. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-26, 26 p.

مقالات

Dynamic Response Law of Loess Slope with Different Shapes

By: Yan, Zhi-xin; Zhang, Sen; Kłosowski, Paweł…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-7, 7 p.

مقالات

Model of Consecutive, Steady-State Underflow for Vertical Tailing Silos

By: Ren, Wei-cheng; Gao, Ru-gao; Nicolais, Luigi…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12

By: Gadelmoula, Abdelrasoul M.; Sorrell, Charles; Aldahash, Saleh A.. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Study on Preparation of Water-Soluble Chitosan with Varying Molecular Weights and Its Antioxidant Activity

By: Xuan Du, Dang; Xuan Bui, Vuong; Mai, Hien Duy. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Experimental Studies on the Mechanical Properties of Loess Stabilized with Sodium Carboxymethyl Cellulose

By: Ma, Hongwang; Russo, Pietro; Ma, Qi. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Experimental Study on the Effects of Initial Shear Stress and Vibration Frequency on Dynamic Strength of Saturated Sands

By: Zhang, Jian; Bing, Kong Ling; Huang, Sijie…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

© 2024 عالم المعرفة للمحتوى الرقمي. جميع الحقوق محفوظة.