Bromate Removal from Water Using Doped Iron Nanoparticles on Multiwalled Carbon Nanotubes (CNTS)‎

Abstract EN

The raw carbon nanotubes (CNTs) were prepared by the floating catalyst chemical vapor deposition method.

The raw carbon nanotubes were functionalized, impregnated with iron nanoparticles, and characterized using high resolution transmission electron microscopy (HRTEM), scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and thermogravimetric analysis (TGA).

The three types of these multiwalled carbon nanotubes were applied as adsorbents for the removal of bromate from drinking water.

The effects of the pH, the concentration of BrO3- anion, the adsorbent dose, the contact time, and the coanions on the adsorption process have been investigated.

The results concluded that the highest adsorption capacities were 0.3460 and 0.3220 mg/g through using CNTs-Fe and raw CNTs, respectively, at the same conditions.

The results showed that the CNTs-Fe gives higher adsorption capacity compared with the raw CNTs and the functionalized CNTs.

The presence of nitrate (NO3-) in the solution decreases the adsorption capacity of all CNTs compared with chloride (Cl-) associated with pH adjustment caused by nitric acid or hydrochloric acid, respectively.

However, the adsorption of all MWNCTs types increases as the pH of solution decreases.