Multiobjective Design of Turbo Injection Mode for Axial Flux Motor in Plastic Injection Molding Machine by Particle Swarm Optimization

Abstract EN

This paper proposes a turbo injection mode (TIM) for an axial flux motor to apply onto injection molding machine.

Since the injection molding machine requires different speed and force parameters setting when finishing a complete injection process.

The interleaved winding structure in the motor provides two different injection levels to provide enough injection forces.

Two wye-wye windings are designed to switch two control modes conveniently.

Wye-wye configuration is used to switch two force levels for the motor.

When only one set of wye-winding is energized, field weakening function is achieved.

Both of the torque and speed increase under field weakening operation.

To achieve two control objectives for torque and speed of the motor, fuzzy based multiple performance characteristics index (MPCI) with particle swarm optimization (PSO) is used to find out the multiobjective optimal design solution.

Both of the torque and speed are expected to be maximal at the same time.

Three control factors are selected as studied factors: winding diameter, winding type, and air-gap.

Experimental results show that both of the torque and speed increase under the optimal condition.

This will provide enough large torque and speed to perform the turbo injection mode in injection process for the injection molding machine.