Benzene Removal by Iron Oxide Nanoparticles Decorated Carbon Nanotubes

Abstract EN

In this paper, carbon nanotubes (CNTs) impregnated with iron oxide nanoparticles were employed for the removal of benzene from water.

The adsorbents were characterized using scanning electron microscope, X-ray diffraction, BET surface area, and thermogravimetric analysis.

Batch adsorption experiments were carried out to study the adsorptive removal of benzene and the effect of parameters such as pH, contact time, and adsorbent dosage.

The maximum removal of benzene was 61% with iron oxide impregnated CNTs at an adsorbent dosage 100 mg, shaking speed 200 rpm, contact time 2 hours, initial concentration 1 ppm, and pH 6.

However, raw CNTs showed only 53% removal under same experimental conditions.

Pseudo-first-order kinetic model was found well to describe the obtained data on benzene removal from water.

Initial concentration was varied from 1 to 200 mg/L for isotherms study.

Langmuir isotherm model was observed to best describe the adsorption data.

The maximum adsorption capacities were 987.58 mg/g and 517.27 mg/g for iron oxide impregnated CNTs and raw CNTs, respectively.

Experimental results revealed that impregnation with iron oxide nanoparticles significantly increased the removal efficiency of CNTs.