Modeling of the Growth Kinetics of Boride Layers in Powder-Pack Borided ASTM A36 Steel Based on Two Different Approaches

Abstract EN

An indispensable tool to choose the suitable process parameters for obtaining boride layer of an adequate thickness is the modeling of the boriding kinetics.

In this work, two mathematical approaches were used in order to determine the value of activation energy in the Fe2B layers on ASTM A36 steel during the iron powder-pack boriding in the temperature range of 1123–1273 K for treatment times between 2 and 8 h.

The first approach was based on the mass balance equation at the interface (Fe2B/substrate) and the solution of Fick’s second law under steady state (without time dependent).

The second approach was based on the same mathematical principles as the first approach for one-dimensional analysis under non-steady-state condition.

The measurements of the thickness (Fe2B), for different temperatures of boriding, were used for calculations.

As a result, the boron activation energy for the ASTM A36 steel was estimated as 161 kJ·mol−1.

This value of energy was compared between both models and with other literature data.

The Fe2B layers grown on ASTM A36 steel were characterized by use of the following experimental techniques: X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray Spectroscopy (EDS).

Finally, the experimental value of Fe2B layer’s thickness obtained at 1123 K with an exposure time of 2.5 h was compared with the predicted thicknesses by using these two approaches.

A good concordance was achieved between the experimental data and the simulated results.