Vertical and Lateral Bearing Capacity of FRP Composite Sheet Piles in Soft Soil

Abstract EN

Fiber-reinforced polymer (FRP) composite sheet piles are usually favored for slope and river-retaining structures due to their construction and environmental efficiency.

Their applications, however, have been hindered by the lack of understanding of the bearing capacity.

This paper studies the vertical and lateral bearing capacity of FRP composite sheet piles through three full-scale tests conducted in Haiyan, a soft soil site in the Yangtze River Delta of China.

In the three tests, we measured the vertical bearing capacity of the FRP composite sheet piles, the bearing capacity of the composite foundation, and the lateral capacity of the FRP composite sheet piles, respectively.

The test results show that the Q-S (load on the top of the pile versus settlement) curve of the FRP composite sheet piles exhibits a steep fall while that of the composite foundation is relatively flat.

Moreover, the ultimate bearing capacity of the FRP composite sheet piles is measured to reach 23.8 kN while that of the composite foundation increases by 47.1 %, reaching 35.0 kN.

It shows that the FRP composite sheet piles under the composite foundation have a favorable bearing performance.

Finally, the final horizontal displacement of the FRP composite sheet pile in the reinforced area with anchoring the sheet pile is smaller than the final horizontal displacement in the nonreinforced area, indicating that the horizontal bearing capacity can be significantly improved by anchoring the sheet pile.