Application of the Bionic Concept in Reducing the Complexity Noise and Drag of the Mega High-Speed Train Based on Computer Simulation Technologies

Abstract EN

Regarding the continuous development of high-speed trains and the increase of running speeds, the aerodynamic design of high-speed trains has become significantly important, while reduction of drag and noise comprises a significant challenge in order to optimize aerodynamic design of high-speed trains.

The design form factor of a high-speed train is highly influenced by aerodynamic aspects including aerodynamic drag, lift force, and noise.

With the high-speed train as the object, the paper aims to take bionic concept as the entry point, selecting the hummingbird as the bionic prototype and extracting bionic elements to establish a bionic train model.

Then, the finite volume method was used for numerical simulation and analysis of the aerodynamic performance and aerodynamic noise of the bionic high-speed train.

Computational results prove that drag and noise of the bionic head type were lower than those of the original train; drag of the head train of the bionic model was reduced by 2.21% in comparison with the original model, while the whole-train drag was reduced by 3.53%, indicating that drag reduction effects are available and implying that the bionic head type could reduce drag and noise.

Noise sources of the bionic train are mainly located at positions with easy airflow separation and violent turbulence motion.

Large turbulence energy is in bogie areas and mainly exists at the leeward side of the bogie area.

Obviously, the bogie area is the major noise source of the train.

Aerodynamic noise of the bionic train in far-field comprises a wide-frequency range.

Noises were concentrated within 613 Hz~3150 Hz.

When the bionic high-speed train ran at 350 km/h, through comparative analysis of total noise levels at observed points of the high-speed train, it is found that this position with the maximum noise level was 25 m away from the head train nose tip, with the maximum value of 88.4 dB (A).

When the bionic train ran at 600 km/h, the maximum sound pressure level at the longitudinal point was 99.7 dB (A) and the average noise level was 96.6 dB (A).

When the running speed increased from 350 km/h to 600 km/h, the maximum noise level increased by 11.3 dB (A) and the average noise level increased by 11.6 dB (A).

Computation results of aerodynamic noise at the point which is 7.5 m away from the rail center show that the maximum aerodynamic noise level existed at the first-end bogie of the head train, while the noise level was larger at the position closer to the ground.