A Method of Differentiating the Early-Time and Late-Time Behavior in Pressure-Pulse Decay Permeametry

Abstract EN

The pressure-pulse decay is a preferred technique for determining permeability of unconventional gas reservoir rocks.

The pressure-pulse decay often shows quite different characteristics during the early time and the later time.

Most approaches for estimating the permeability proposed in the literature are required to use the later-time pressure-pulse decay measurements.

However, the later-time data are often selected subjectively, lacking a universal criterion.

In this paper, a method of differentiating the early-time and late-time behavior for pressure-pulse decay test is proposed.

The analytical results show that the critical time (dimensionless time) of early-/late-time decay characteristics mainly depends on the volume ratios, and it increases first and then decreases with the volume ratios.

The critical time for cases with same chamber sizes is much less than that for cases with unequal chamber sizes.

Applicability of the proposed methods is examined using a numerical simulator, TOUGH+REALGASBRINE.

The numerical results show that the pressure gradient along the sample varies nonlinearly at the early time and becomes a constant at the late time.

Then, the proposed method is applied to real data for permeability estimation.

It is found that the early-time behavior is negligible as the volume ratio takes on small values.

As the volume ratios increase, the deviation becomes significant and considerable permeability errors will be produced if these early-time data are used.