Wear and hardness properties of carburized (aisi 1011) steel
Joint Authors
Abd al-Razzaq, Muhammad Abd al-Rauf
Jabbar, Diyar A.
Kazim, Ziyad D.
Source
Journal of Engineering and Sustainable Development
Publisher
al-Mustansyriah University College of Engineering
Publication Date
2020-12-31
Country of Publication
Iraq
No. of Pages
7
Main Subjects
Topics
English Abstract
In this research, the influence of carburizing process on low carbon steel AISI 1011 on the mechanical characteristics had been studied.
It was found that hardness of this alloy increased for samples treated with carburizing procedure at 950°C for five hours it became 431.65 HV, while the hardness value of untreated specimens was 169.65 HV.
Furthermore, surface roughness of metal increased for specimen treated with carburizing process, and it has become 1.98 µm.
A pin on disk machine was employed for achieved the tests of wear under constant time 30 minutes for five different applied loads 10, 15, 20, 25 and 30 N.
The results illustrate there is an increment in wear rate with increasing the applied load.
The maximum wear rate became (6.2434×10-8 gm/cm) at load 30 N for untreated specimens, while for carburized specimens the wear rate became (4.7638×10-8 gm/cm ) at the same applied load.
Also, it was observed that the wear resistance for carburized specimens higher than untreated samples.
Data Type
Conference Papers
Record ID
BIM-1269225
American Psychological Association (APA)
Jabbar, Diyar A.& Kazim, Ziyad D.& Abd al-Razzaq, Muhammad Abd al-Rauf. 2020-12-31. Wear and hardness properties of carburized (aisi 1011) steel. . Vol. 24, Special issue (2020), pp.402-408.Baghdad Iraq : al-Mustansyriah University College of Engineering.
https://search.emarefa.net/detail/BIM-1269225
Modern Language Association (MLA)
Jabbar, Diyar A.…[et al.]. Wear and hardness properties of carburized (aisi 1011) steel. . Baghdad Iraq : al-Mustansyriah University College of Engineering. 2020-12-31.
https://search.emarefa.net/detail/BIM-1269225
American Medical Association (AMA)
Jabbar, Diyar A.& Kazim, Ziyad D.& Abd al-Razzaq, Muhammad Abd al-Rauf. Wear and hardness properties of carburized (aisi 1011) steel. .
https://search.emarefa.net/detail/BIM-1269225