Numerical analysis of linear elevator structure using finite element method
Joint Authors
Muhammad, Jamal A. K.
Uthman, Saba A.
Muhammad, Faraj Mahel
Source
Engineering and Technology Journal
Issue
Vol. 39, Issue 9 (30 Sep. 2021), pp.1430-1436, 7 p.
Publisher
Publication Date
2021-09-30
Country of Publication
Iraq
No. of Pages
7
Main Subjects
Topics
Abstract EN
In this work, the structure of the linear elevator prototype had been investigated numerically using finite element method.
The linear motor structure parameters analyzed using Maxwell ANSYS.
The time-stepping method depending on Maxwell equations be applied for analyzing and optimizing the magnetic and force characteristics.
While the elevator structure parameters were analyzed using ANSYS workbench based on the principle of virtual work.
The frame considered as clamped- clamped beam, and the base of the car considered as thin plate with small deflection.
The analysis done with maximum applied load of 360 N at 1.5 safety factor.
The results show the distribution of the magnetic lines, the flux density values plus the leakage flux inside the slots.
The maximum Von-Mises stress and the deformations of the frame and plate at maximum load are acceptable and present save design.
In which the maximum deflection of the thin plate not exceed (thickness/5) at maximum design In this work, the structure of the linear elevator prototype had been investigated numerically using finite element method.
The linear motor structure parameters analyzed using Maxwell ANSYS.
The time-stepping method depending on Maxwell equations be applied for analyzing and optimizing the magnetic and force characteristics.
While the elevator structure parameters were analyzed using ANSYS workbench based on the principle of virtual work.
The frame considered as clamped- clamped beam, and the base of the car considered as thin plate with small deflection.
The analysis done with maximum applied load of 360 N at 1.5 safety factor.
The results show the distribution of the magnetic lines, the flux density values plus the leakage flux inside the slots.
The maximum Von-Mises stress and the deformations of the frame and plate at maximum load are acceptable and present save design.
In which the maximum deflection of the thin plate not exceed (thickness/5) at maximum design load
American Psychological Association (APA)
Uthman, Saba A.& Muhammad, Jamal A. K.& Muhammad, Faraj Mahel. 2021. Numerical analysis of linear elevator structure using finite element method. Engineering and Technology Journal،Vol. 39, no. 9, pp.1430-1436.
https://search.emarefa.net/detail/BIM-1281522
Modern Language Association (MLA)
Muhammad, Jamal A. K.…[et al.]. Numerical analysis of linear elevator structure using finite element method. Engineering and Technology Journal Vol. 39, no. 9 (2021), pp.1430-1436.
https://search.emarefa.net/detail/BIM-1281522
American Medical Association (AMA)
Uthman, Saba A.& Muhammad, Jamal A. K.& Muhammad, Faraj Mahel. Numerical analysis of linear elevator structure using finite element method. Engineering and Technology Journal. 2021. Vol. 39, no. 9, pp.1430-1436.
https://search.emarefa.net/detail/BIM-1281522
Data Type
Journal Articles
Language
English
Notes
Includes bibliographical references : p. 1435-1436
Record ID
BIM-1281522