Impact behavior of a STS 304 h sheet with a thickness of 0.7 mm
Joint Authors
Ahn, Dong Gyu
Moon, Gyung Je
Jung, Chang Gyun
Han, Gil Young
Yang, Dong Yol
Source
The Arabian Journal for Science and Engineering
Publisher
King Fahd University of Petroleum and Minerals
Publication Date
2009-06-30
Country of Publication
Saudi Arabia
No. of Pages
15
Main Subjects
Engineering & Technology Sciences (Multidisciplinary)
Topics
Arabic Abstract
تهدف هذه الورقة البحثية إلى دراسة سلوكيات صدم صفيحة من الفولاذ الاصدوء (ستاينلس ستيل) STS 304 H ذات سماكة 0.7 مم في حالة الحد المثبت و ذلك من خلال إجراء اختبار صدم و دراسة حسابية.
و من أجل فحص تأثير أحوال الصدم التي تتضمن طاقة الصدم و قطر مقدمة رأس الصدم، على منحنيات (أشكال ) انحراف القوة، و خصائص امتصاص طاقة الصدم و خصائص الانكسار، أجريت تجارب صدم متعددة باستعمال آلة فحص الصدم بالإسقاط مع نظام لتحليل الإشارات مبني على معالج صغري.
ومن خلال ملاحظة البنية المجهرية المجاورة لمكان الصدم باستعمال مجهر إلكتروني ماسح، تم التوصل إلى حصول عيب التغضن (ORANGE PEEL) و تصدع بين الحبيبات في محيط نقطة لمس رأس الصدم.
كما أجريت دراسة حسابية ثلاثية الأبعاد مبينة على طريقة العناصر المحدودة بوساطة البرنامج التجاريABAQUS EXPLICIT لدراسة آثار أوضاع الصدم على توزيع الانفعال المطاوع، و على توزيع الإجهاد، و على سلوك التشوه المحلي في في العينة.
و أظهرت نتائج هذه الدراسة الحسابية أن تصدع العينة يحصل عندما يكون كل من الانفعال المطاوع، و الإجهاد الفعال، و الطاقة المتبددة اللدنية في المكان المتصدع مساويا ل 0.42، 1525MPA، و 1.83J تقريبا على التوالي.
English Abstract
The objective of this paper is to investigate impact behaviors of a STS 304 H stainless steel sheet with a thickness of 0.7 mm in the fixed boundary condition through an impact experiment and a numerical analysis.
In order to examine the influence of impact conditions, including the impact energy and the nose diameter of the impact head, on force-deflection curves, absorption characteristics of the impact energy, and fracture characteristics, several impact tests were performed using a drop impact testing machine with micro-processor based signal processing system.
Through the observation of microstructures in the vicinity of the impact area using a scanning electron microscope, it was found that the orange peel defect and the intergranular fracture occur in the vicinity of the contact area of the impact head.
Three-dimensional FE analysis was performed by a commercial code ABAQUS Explicit to investigate the influence of impact conditions on plastic strain distributions, stress distributions, and local deformation behavior in the specimen.
The results of the FE analysis showed that the fracture of the specimen takes place when the plastic strain, the effective stress, and the plastic dissipation energy in the fractured area are approximately 0.42, 1525 MPa, and 1.83 J, respectively.
Data Type
Conference Papers
Record ID
BIM-327622
American Psychological Association (APA)
Ahn, Dong Gyu& Moon, Gyung Je& Jung, Chang Gyun& Han, Gil Young& Yang, Dong Yol. 2009-06-30. Impact behavior of a STS 304 h sheet with a thickness of 0.7 mm. Advanced manufacturing processes and technologies (AMPT) Conference (2008 : Bahrain). . Vol. 34, no. 1C(s) (Jun. 2009), pp.57-71.Dhahran Saudi Arabia : King Fahd University of Petroleum and Minerals.
https://search.emarefa.net/detail/BIM-327622
Modern Language Association (MLA)
Ahn, Dong Gyu…[et al.]. Impact behavior of a STS 304 h sheet with a thickness of 0.7 mm. . Dhahran Saudi Arabia : King Fahd University of Petroleum and Minerals. 2009-06-30.
https://search.emarefa.net/detail/BIM-327622
American Medical Association (AMA)
Ahn, Dong Gyu& Moon, Gyung Je& Jung, Chang Gyun& Han, Gil Young& Yang, Dong Yol. Impact behavior of a STS 304 h sheet with a thickness of 0.7 mm. . Advanced manufacturing processes and technologies (AMPT) Conference (2008 : Bahrain).
https://search.emarefa.net/detail/BIM-327622