Solid phase extraction of copper, cadmium and lead using amberlite XAD-4 resin functionalized with 2-hydroxybenzaldehyde thiosemicarbazone and it application on green tea leaves

Joint Authors

Chowdhury, Didarul A.
al-Huqui, Md. Ikram
Fardous, Zeenath

Source

Jordan Journal of Chemistry

Issue

Vol. 8, Issue 2 (30 Jun. 2013), pp.90-102, 13 p.

Publisher

Yarmouk University Deanship of Research and Graduate Studies

Publication Date

2013-06-30

Country of Publication

Jordan

No. of Pages

13

Main Subjects

Chemistry

Topics

Abstract EN

A new chelating resin, 2-hydroxybenzaldehyde thiosemicarbazone loaded XAD-4, was synthesized and characterized by FT-IR and elemental analyses.

The synthesized resin was used for solid phase extraction (SPE) and preconcentration of Cu2+, Cd2+, and Pb2+ from aqueous solution, where the metal ions were subsequently determined by graphite furnace atomic absorption spectrometry (GF-AAS).

The optimum pH for preconcentration and separation of these metal ions was found to be 6.00.

Optimum flow rate for quantitative sorption of the metal ions on functionalized resin was found to be 1 mL / min whereas 2 M nitric acid was selected as the eluent for quantitative release of the three metal ions from the resin column.

The maximum adsorption capacity of the functionalized resin was found to be 3.5, 6.1, and 11.26 mg / g for Cu2+, Cd2+, and Pb2+, respectively.

The detection limits for these metal ions are 0.87, 0.95, and 1.09 μg / L, respectively and limits of quantification are 1.12, 1.29, and 1.16 μg / L, respectively.

The sorption half time (t1 / 2) was found to be 6 min for Cu 2+ and Cd 2+ and 8 min for Pb2+.

Tolerance limits for various foreign electrolytes have also been investigated.

A high preconcentration factor (100) and low relative standard deviation ≤ 5 % (n = 3) values were obtained.

Under optimum conditions, recovery of all metal ions was found to be nearly quantitative.

The validation of the procedure was carried out by analysis of certified reference materials.

The functionalized resin is highly stable and can be reused more than 100 times.

The newly developed method was applied to the separation, preconcentration and determination of Cu2+, Cd2+, and Pb2+ in tea leaves collected from the tea gardens of Moulovibazar district in Bangladesh.

American Psychological Association (APA)

Chowdhury, Didarul A.& al-Huqui, Md. Ikram& Fardous, Zeenath. 2013. Solid phase extraction of copper, cadmium and lead using amberlite XAD-4 resin functionalized with 2-hydroxybenzaldehyde thiosemicarbazone and it application on green tea leaves. Jordan Journal of Chemistry،Vol. 8, no. 2, pp.90-102.
https://search.emarefa.net/detail/BIM-334556

Modern Language Association (MLA)

Chowdhury, Didarul A.…[et al.]. Solid phase extraction of copper, cadmium and lead using amberlite XAD-4 resin functionalized with 2-hydroxybenzaldehyde thiosemicarbazone and it application on green tea leaves. Jordan Journal of Chemistry Vol. 8, no. 2 (Jun. 2013), pp.90-102.
https://search.emarefa.net/detail/BIM-334556

American Medical Association (AMA)

Chowdhury, Didarul A.& al-Huqui, Md. Ikram& Fardous, Zeenath. Solid phase extraction of copper, cadmium and lead using amberlite XAD-4 resin functionalized with 2-hydroxybenzaldehyde thiosemicarbazone and it application on green tea leaves. Jordan Journal of Chemistry. 2013. Vol. 8, no. 2, pp.90-102.
https://search.emarefa.net/detail/BIM-334556

Data Type

Journal Articles

Language

English

Notes

Includes bibliographical references : p. 101-102

Record ID

BIM-334556