Numerical Investigation on Jet Impingement Behaviors Affected by a Vertically Rotating Disk Suspended Close to the Surface

Abstract EN

A simplified physical model is built up to study the swirl flow effect induced by a rotating disk on the jet impingement behaviors, which is adopted to simulate the grinding process.

To solve the definition problem of the interface between a rotating disk and a stationary plate in the computational simulation, a tiny gap is set between the rotating disk and the stationary plate.

The results show that the rotating disk suspended above the surface adds more complexity to the flow field of jet impingement on a stationary plate.

The swirling flow around the rotating disk obstructs the impinging jet flow to penetrate into the interfacial contact zone and forces the wall jet across the rotating disk to flow along transverse directions.

For the given jet impinging velocity and nozzle orientation, as the disk rotational speed increases, the effect of the rotating disk on the impinging jet flow behaves more significantly.

The impinging jet with small inject velocity is difficult to penetrate through the interfacial contact zone to follow by the disk swirl flows.

For smaller jet impinging distance or larger oblique angle, the flow recirculation away from the interfacial contact zone becomes stronger.