Design of PCB Impedance Matching Inductors and Antennas for Single-Chip Communication Systems

Abstract EN

This paper presents the design of an inductor and an antenna for a portable device with GPS and FM capabilities.

The inductor is designed to operate at the lower frequency FM band as part of a matching network and the antenna is designed to operate at the higher frequency GPS L1 band.

The FR4 PCB used has a thickness of 1.6 mm with a dielectric constant of 3.8 and has two metallization layers.

The inductor is designed with 1.5 mm trace width, 3.5 turns, and has a dimension of 14.5 mm × 14.5 mm.

It has an inductance of 95 nH, a resistance of 2.9 Ω, a self-resonance frequency of 500 MHz, and a maximum Q of 51 from 100 MHz to 200 MHz (FM band).

The antenna has a dimension of 49 mm × 36 mm and is designed to operate at 1.5754 GHz L1 band.

It also has a return loss of −36 dB and a measured bandwidth of 250 MHz.