Optimization of Rear Local Contacts on High Efficiency PERC Solar Cells Structures

Abstract EN

A local contact formation process and integration scheme have been developed for the fabrication of rear passivated point contact solar cells.

Conversion efficiency of 19.6% was achieved using 156×156 mm, pseudo square, p-type single crystalline silicon wafers.

This is a significant improvement when compared to unpassivated, full area aluminum back surface field solar cells, which exhibit only 18.9% conversion efficiency on the same wafer type.

The effect of rear contact formation on cell efficiency was studied as a function of contact area and contact pitch, hence the metallization fraction.

Contact shape and the thickness of Al-BSF layer were found to be heavily dependent on the laser ablation pattern and contact area.

Simulated cell parameters as a function of metallization showed that there is a tradeoff between open circuit voltage and fill factor gains as the metallization fraction varies.

The rear surface was passivated with an Al2O3 layer and a SiNX capping layer.

The rear surface contact pattern was created by laser ablation and the contact geometry was optimized to obtain voids free contact filling, resulting in a uniform back surface field.

The efficiency gain in rear passivated cells over the reference cells is mainly due to improved short circuit current and open circuit voltage.