Thin RC shell-slab roofing system with steel rod connections
Other Title(s)
منظومة تسقيف قشرة- بلاطة خرسانية مع روابط قضبان فولاذية
Joint Authors
al-Fihan, Ashraf Abd al-Hadi
Husayn, Husayn Muhammad
Source
Engineering and Technology Journal
Issue
Vol. 28, Issue 05 (31 Jan. 2010), pp.851-870, 20 p.
Publisher
Publication Date
2010-01-31
Country of Publication
Iraq
No. of Pages
20
Main Subjects
Abstract AR
تم أبتداع منظومة جديدة من أنظمة التسقيف أطلق عليها تسمية منظومة تسقيف القشرة و البلاطة و هي عبارة عن وحدات جاهزة من الخرسانة المسلحة ذات السمك القليل تتكون من بلاطة مستوية و قشرة أسطوانية واطئة الارتفاع لتشكيل وحدة تسقيف.
تسند البلاطة على القشرة عند المنتصف و ترتبط معها من الجانبين بواسطة روابط قضبان فولاذية تنقل الأحمال من البلاطة إلى القشرة.
تم تثبيت شرائح حديدية تحت البلاطة و فوق و تحت القشرة الأسطوانية كحديد تسليح خارجي و لمقاومة قوى القص الثنائي التي قد تحدث حول روابط القضبان الفولاذية.
تم استعمال نسبة ارتفاع إلى طول وتر القشرة تساوي (0.1).
تم تقصي التصرف الإنشائي لوحدات التسقيف تحت حمل ستاسيكي منتظم مع دراسة تأثير عدة متغيرات عملية.
تضمن البرنامج العملي أنشاء ست وحدات تسقيف متكاملة باستخدام معامل تصغير يساوي (0.25) و باعتماد نسبة مزج الماء إلى الأسمنت (0.5) و مزج الأسمنت إلى الرمل مساوية إلى (1:2) و جرى اختبار الوحدات لقياس الإزاحات العمودية و الانفعالات على السطح في عدة مواضع مختارة.
تبين أن المنظومة التي تحتوي أقل نسبة لحديد التسليح الداخلي و عدد روابط القضبان الفولاذية (12) تفي لمقاومة الأحمال الحية للأبنية ذات الفضاءات الواسعة و أثبتت الدراسة إمكانية استخدام مثل هذا النوع من التسقيف للفضاءات الواسعة و الأبنية التقليدية بنسبة تحدب (h/c) واطئة تساوي (0.1).
Abstract EN
An innovated structural system, namely the Shell-Slab Roofing System (SSRS) of precast thin reinforced concrete cylindrical shell and flat slab has been fabricated as a roof segmental unit.
The flat slab rests on the cylindrical shell at the crown and also connected to the shell by steel rod connections at each side.
Steel plate strips are fixed on the bottom surface of the slab and on the top and the bottom surfaces of the shell as external tensile and shear steel reinforcement to prevent punching shear around the steel rod connections.
The ratio of the shell height to the chord length was (0.1).
The structural behavior of the roof system had been investigated under uniformly distributed static load.
Experimental work was carried out by fabrication of six complete segments with scale-down simulation factor equal to (0.25).
The vertical deflections had been observed at selected positions on the models.
A water / cement ratio of (0.5) combined with a cement : sand ratio of (1:2) had been employed.
The influence of certain experimental parameters had been studied.
The model with only twelve rod connections and minimum reinforcement volume ratio was adequate to resist the live loads for buildings with large span roofing.
The investigation showed that the combined unit of thin concrete shell and flat slab with embedded small diameter steel reinforcement was suitable for construction of such roofing system as large span structures with lower ratio of shell height to chord length (h / c) equal to (0.1).
American Psychological Association (APA)
Husayn, Husayn Muhammad& al-Fihan, Ashraf Abd al-Hadi. 2010. Thin RC shell-slab roofing system with steel rod connections. Engineering and Technology Journal،Vol. 28, no. 05, pp.851-870.
https://search.emarefa.net/detail/BIM-63404
Modern Language Association (MLA)
Husayn, Husayn Muhammad& al-Fihan, Ashraf Abd al-Hadi. Thin RC shell-slab roofing system with steel rod connections. Engineering and Technology Journal Vol. 28, no. 05 (2010), pp.851-870.
https://search.emarefa.net/detail/BIM-63404
American Medical Association (AMA)
Husayn, Husayn Muhammad& al-Fihan, Ashraf Abd al-Hadi. Thin RC shell-slab roofing system with steel rod connections. Engineering and Technology Journal. 2010. Vol. 28, no. 05, pp.851-870.
https://search.emarefa.net/detail/BIM-63404
Data Type
Journal Articles
Language
English
Notes
Includes bibliographical references : p. 858
Record ID
BIM-63404